Rope pull switches ensure that dangerous movements are stopped reliably over long distances. The rope is positively connected to the rope pull switch for optimum safeguarding of the hazardous points. In the working position, the rope is under tension and the safety-relevant contacts the positive opening normally closed contacts are closed. The contacts are opened by a pull on the rope or if the rope breaks, and the emergency stop function is triggered. Actuation is possible at any point along the rope. The rope pull switches comply with EN 13850 and EN 60947-5-5 standards.
i110RP
The appropriate solution for extensive areas
Rope lengths up to 30 m, with rope break and rope pull function
Standardized metal housing with position display and rotary unlocking lever
1 cable entry gland M20 x 1.5
Slow action switching elements with four contacts
i150RP
Universal use due to greater function and longer rope length
Rope lengths up to 75 m, with rope break and rope pull function
Metal housing with integrated emergency stop pushbutton and fault display
Rotary unlocking lever
3 cable entry glands M20 x 1.5
Slow action switching elements with four contacts

Contact Us
Hot Products