SICK VL12-2P430 (6026220)- A&S Automation Co., Ltd

Home / Sensors / Sick Sensor / SICK VL12-2P430 (6026220)

Add To Cart

Photoelectric reflex switch VL12-2P430

Your benefits

Economical solution for reliably detecting reflective objects up to 2.8 m (with PL80A reflector)
Standard M12 miniature housing saves installation space on the machine
Simple design and time-saving installation due to a standard M12 housing
Polarizing filter prevents false readings on reflective surfaces, reducing downtime
Fast and simple alignment to the reflector due to visible red light
Fast response times ensure reliable detection of objects at high speeds, increasing machine throughput
Tough metal housing provides a long service life, reducing maintenance time and costs

Features
Sensing range max.:	0.03 m ... 2.8 m ¹⁾
Sensing range:	0.03 m ... 2.3 m ²⁾
Housing desig (light emission):	Cylindrical, straight
Light source:	LED ³⁾
Type of light:	visible red light
Wave length:	660 nm
Housing length:	66 mm
Thread diameter (housing):	M12 x 1
Sensor/detection principle:	Photoelectric retro-reflective sensor
Light spot (distance):	80 mm (2 m)
¹⁾ ²⁾ PL80A ³⁾ Average service life of 100,000 h at T_A = +25 C
Mechanics/electronics
Enclosure rating:	IP 67
Supply voltage:	10 V DC ... 30 ¹⁾
Residual ripple:	≤ 10 % ²⁾
Power consumption:	20 ³⁾
Switching output:	PNP, light/dark-switching, Selectable via L/D control wire
Output current Imax.:	100 ⁴⁾
Response time:	≤ 1.25 ms ⁵⁾
Switching frequency:	400 ⁶⁾
Connection type:	Connector M12, 4-pin
Protection class:	III
Circuit protection:	A B C D ⁷⁾ ⁸⁾ ⁹⁾ ¹⁰⁾
Weight:	18 g
Housing material:	Nickel-plated brass/PA
Optics material:	PMMA
Ambient temperature, operation:	-25 ... 70 C
Ambient temperature, storage:	-25 ... 70 C
Polarisation filter:
Special device:	-
Angle of dispersion:	2.3
¹⁾ Limit values ²⁾ May not exceed or fall short of V_S ³⁾ ⁴⁾ Without load ⁵⁾ Signal transit time with resistive load ⁶⁾ With light/dark ratio 1:1 ⁷⁾ A = V_S connections reverse-polarity protected ⁸⁾ B = inputs and output reverse-polarity protected ⁹⁾ C = interference suppression ¹⁰⁾ D = outputs overcurrent and short-circuit protected

Hot Products

Reviews(0)

Write a Review

Hot Products