
Add To Cart
share
SICK VS/VE18-4P3440 Overview
Through-beam Photoelectric Switch, Sender + Receiver; VS/VE18-4P3440
SICK VS/VE18-4P3440 Description
- Standard photoelectric through-beam sensor in M18 cylindrical housing
- Scanning distance up to 20 m
- Voltage supply of 20 to 253 V AC with TRIAC output (depending on type)
- Standardized design enables simple assembly and alignment and simple replacement of the device
- Suitable for standard applications
- For connection to alternating voltage
Your benefits
Features | |
Sensing range max.: | 0 m ... 20 m |
Sensing range: | 0 m ... 14 m |
Housing desig (light emission): | angled 90 |
Light source: | LED 1) |
Type of light: | Infrared light |
Adjustment: | adjustable |
Sensitivity adjustment: | Potentiometer, 270 |
Housing length: | 75 mm |
Thread diameter (housing): | M18 x 1 |
Sensor/detection principle: | Through-beam photoelectric sensor |
Light spot (distance): | 700 mm (14 m) |
Optical axis: | radial |
1) Average service life 100,000 h at Ta = +25 C | |
Mechanics/electronics | |
Enclosure rating: | IP 67 |
Supply voltage: | 10 V DC ... 30 V DC 1) |
Residual ripple: | ≤ 10 % 2) |
Power consumption: | ≤ 30 mA 3) |
Switching output: | PNP, light/dark-switching, Selectable via L/D control wire, open collector 4) |
Output current Imax.: | 100 mA |
Response time: | ≤ 2 ms 5) |
Switching frequency: | 250 Hz with light/dark ratio 1:1 |
Connection type: | Connector M12, 4-pin |
Protection class: | III |
Circuit protection: | A B C D 6) 7) 8) 9) |
Weight: | 240 g |
Housing material: | Nickel-plated brass |
Ambient temperature, operation: | -25 C ... 70 C |
Test input sender off: | TE to 0 V |
Angle of dispersion: | 2.8 |
1) Limit values 2) 3) Without load 4) Control wire open: dark-switching D.ON 5) Signal transit time with resistive load 6) A = VS connections reverse-polarity protected 7) B = inputs and output reverse-polarity protected 8) C = interference suppression 9) D = outputs overcurrent and short-circuit protected |