
Add To Cart
share
SICK VT12T-2N410 Overview
Photoelectric proximity switch VT12T-2N410 energetic
SICK VT12T-2N410 Description
- Sensing distance up to 115 mm or 340 mm (90% remission)
- 2 teach-in modes: Standard teach mode for basic applications, precise teach mode with small hysteresis for special applications
- Adjustable light or dark switching as complementary outputs
- PNP or NPN output available
- Complements inductive sensor portfolio
- M12 housing
- 4-pin M12 connector or 2 m cable
- Standard M12 miniature housing saves installation space on the machine
- Simple design and time-saving installation due to a standard M12 housing
- Operating reserve display simplifies commissioning and saves maintenance time
- Cost-effective solution due to simple mounting, standardized connection technology and broad application use
- Fast response times ensure reliable detection of objects at high speeds, increasing machine throughput
- Tough metal housing provides a long service life, reducing maintenance time and costs
Your benefits
Features | |
Sensing range max.: | 0 mm ... 115 mm 1) |
Sensing range: | 2 mm ... 100 mm |
Housing desig (light emission): | Cylindrical, straight |
Light source: | LED 2) |
Type of light: | Infrared light |
Wave length: | 880 nm |
Sensitivity adjustment: | Manual, via teach-in button electronic, via control input C (0 V) |
Housing length: | 65.5 mm |
Thread diameter (housing): | M12 x 1 |
Sensor/detection principle: | Photoelectric proximity sensor, energetic |
Light spot (distance): | 20 mm (100 mm) |
1) Object with 90 % reflectance (referred to standard white DIN 5033) 2) Average service life of 100,000 h at TA = +25 C | |
Mechanics/electronics | |
Enclosure rating: | IP 67 |
Supply voltage: | 10 V DC ... 30 1) |
Residual ripple: | ≤ 10 % 2) |
Power consumption: | 20 3) |
Switching output: | NPN, light/dark-switching, Selectable via control input C |
Output current Imax.: | 100 4) |
Response time: | ≤ 1.25 ms 5) |
Switching frequency: | 400 6) |
Connection type: | Connector M12, 4-pin |
Protection class: | III |
Circuit protection: | A B C D 7) 8) 9) 10) |
Weight: | 18 g |
Housing material: | Nickel-plated brass/PA |
Optics material: | PMMA |
Ambient temperature, operation: | -25 ... 70 C |
Ambient temperature, storage: | -25 ... 70 C |
Special device: | - |
Angle of dispersion: | 11.4 |
1) Limit values 2) May not exceed or fall short of VS 3) 4) Without load 5) Signal transit time with resistive load 6) With light/dark ratio 1:1 7) A = VS connections reverse-polarity protected 8) B = inputs and output reverse-polarity protected 9) C = interference suppression 10) D = outputs overcurrent and short-circuit protected |