
Add To Cart
share
SICK VT18-204172 Overview
Photoelectric Proximity Switch VT18-2O4172 M18, plastic housing NPN/PNP/Q+Q/,DC 10-30V, cable 2m, scanning distance 100 mm fix, with BGS
SICK VT18-204172 Description
- Standard photoelectric proximity sensor in M18 cylindrical housing
- Energetic proximity sensor with three scanning distances of 100 m, 200 mm or 400 mm
- Voltage supply of 20 to 253 V AC with TRIAC output.
- Standardized design enables simple assembly and alignment and simple replacement of the device
- Individual devices for various scanning distances
- For connection to alternating voltage
Your benefits
Features | |
Sensing range max.: | 2 mm ... 100 mm 1) |
Sensing range: | 100 mm 2) 3) |
Housing desig (light emission): | Cylindrical, straight, straight |
Light source: | LED 4) |
Type of light: | Infrared light |
Housing length: | 88 mm |
Thread diameter (housing): | M18 x 1 |
Sensor/detection principle: | Photoelectric proximity sensor, Background blanking |
Light spot (distance): | 12 mm (130 mm) |
Optical axis: | axial |
1) Object with 90 % reflectance (referred to standard white DIN 5033) 2) Fix 3) Background blanking at 115 mm 4) Average service life 100,000 h at Ta = +25 C | |
Mechanics/electronics | |
Enclosure rating: | IP 67 |
Supply voltage: | 10 V DC ... 30 V DC 1) |
Residual ripple: | ≤ 10 % 2) |
Power consumption: | ≤ 30 mA 3) |
Switching output: | NPN, light/dark-switching, programmable by electrical connection PNP |
Output current Imax.: | 100 mA |
Response time: | ≤ 6.25 ms 4) |
Switching frequency: | 80 Hz 5) |
Connection type: | Cable, 3-wire, 2 m 6) |
Cable material: | PVC |
Conductor cross-section: | 0.34 mm2 |
Cable diameter: | 4.7 mm |
Protection class: | III |
Circuit protection: | A B C D 7) 8) 9) 10) |
Weight: | 95 g |
Housing material: | PBT/PC |
Optics material: | PMMA |
Ambient temperature, operation: | -25 C ... 70 C |
Ambient temperature, storage: | -25 C ... 75 C |
Special device: | - |
Angle of dispersion: | 3.5 |
1) Limit values 2) May not exceed or fall short of VS 3) Without load 4) Signal transit time with resistive load 5) With light/dark ratio 1:1 6) Do not bend below 0 C 7) A = VS connections reverse-polarity protected 8) B = inputs and output reverse-polarity protected 9) C = interference suppression 10) D = outputs overcurrent and short-circuit protected |