SICK WL11-2P1130 (1041386)- A&S Automation Co., Ltd

Home / Sensors / Sick Sensor / SICK WL11-2P1130 (1041386)

Add To Cart

Photoelectric reflex switch WL11-2P1130 PNP, complementary outputs, cable 2 m

Retro-reflective with standard lens principle
Robust sensors for industrial use
PinPoint technology is precise and fast-reacting for optimal detection of a very wide range of objects
Space-saving plastic housing in chemically, thermally or mechanically-resistant designs
Dovetail mounting - mounting holes and oblong holes for a very wide range of securing options
All-round, easily visible status LEDs
Optional scanning range setting via teach-in
Operating distance up to 10 m

Your benefits

Reliable universal detection of objects thanks to superior OES2 chip technology
Effective suppression of optical interference factors from the industrial environment
PinPoint technology for bright, small and precise light spot enabling fast and simple sensor alignment
Precision switching characteristics and high standard of detection quality guaranteeing universal detection of objects
The WL11-2 is designed for industrial use: its robust housing, resistance to high-pressure cleaners, cleaning agents and disinfectants ensure less downtime
User-friendly sensors, sensitivity control by teach-in, simple installation and sensor diagnosis using easily visible status LEDs mean there is no need for specialist personnel or expensive training.
Easily installed with SICK accessories

Features
Dimensions (W x H x D)::	15.6 mm x 48.5 mm x 42 mm
Sensing range max.:	0.15 m ... 10 m ¹⁾
Sensing range:	0.15 m ... 8 m ²⁾
Light source:	LED ³⁾
Type of light:	visible red light
Wave length:	640 nm
Adjustment:	no/fix
Sensor/detection principle:	Photoelectric retro-reflective sensor, Standard optics
Light spot (distance):	50 mm (3 m)
¹⁾ ²⁾ PL80A ³⁾ Average service life 100,000 h at Ta = +25 C
Mechanics/electronics
Enclosure rating:	IP 66 IP 67 IP 69K
Supply voltage:	10 V DC ... 30 V DC ¹⁾
Residual ripple:	≤ 5 Vpp ²⁾
Power consumption:	≤ 30 mA ³⁾
Switching output:	PNP, light/dark-switching, Complementary
Output current Imax.:	100 mA
Response time:	≤ 2.5 ms ⁴⁾
Switching frequency:	200 Hz with light/dark ratio 1:1
Connection type:	Cable, 4-wire 2 m ⁵⁾
Cable material:	PVC
Conductor cross-section:	0.25 mm2
Protection class:	II
Circuit protection:	A C D ⁶⁾ ⁷⁾ ⁸⁾
Weight:	200 g
Housing material:	ABS
Optics material:	PMMA
Ambient temperature, operation:	-30 C ... 60 C
Ambient temperature, storage:	-40 C ... 75 C
Polarisation filter:
Signal voltage PNP HIGH / LOW:	Uv - 2.5 V / approx. 0 V
Angle of dispersion:	Ca. 2.2
¹⁾ Limit values, operation in short-circuit protected network max. 8 A ²⁾ ³⁾ Without load ⁴⁾ Signal transit time with resistive load ⁵⁾ Do not bend below 0 C ⁶⁾ A = VS connections reverse-polarity protected ⁷⁾ C = interference suppression ⁸⁾ D = outputs overcurrent and short-circuit protected

Hot Products

Reviews(0)

Write a Review

Hot Products