f SICK WL150-P122 (6020686)- A&S Automation Co., Ltd
 
Home / Sensors / Sick Sensor / SICK WL150-P122 (6020686)

Add To Cart
share


SICK WL150-P122 Overview



Reflex Photoelectric Switch WL150-P122 DC 10...30 V, PNP, cable 2 m, for detection of transparent objects

SICK WL150-P122 Description



  • Standard optics
  • Polfilter
  • Sensing distance of up to 2.4 m
  • Version for detection of transparent objects
  • Sensitivity control on device via potentiometer
  • Light/dark switching selectable via control wire
  • Suitable for Diamond Grade reflective tape
  • Your benefits

  • Polarizing filters prevent false readings on reflective surfaces, ensuring reliable object detection
  • Reliable detection of transparent objects
  • Reliable detection of objects moving at fast speeds
  • Highly visible red light for easy alignment

Features
Dimensions (W x H x D)::10 mm x 28 mm x 17.5 mm
Sensing range max.: 0.01 m ... 0.7 m 1)
Sensing range: 0.01 m ... 0.6 m 2)
Housing desig (light emission):Cuboid
Light source:LED 3)
Type of light:visible red light
Sensitivity adjustment:Potentiometer, 270
Sensor/detection principle:Photoelectric retro-reflective sensor, Standard optics
1) 2) PL80A 3) Average service life 100,000 h at Ta = +25 C
Mechanics/electronics
Enclosure rating:IP 67
Supply voltage:10 V DC ... 30 V DC 1)
Residual ripple: 10 % 2)
Power consumption:≤ 30 mA 3)
Switching output:PNP, light/dark-switching, control cable, open collector
Output current Imax.:≤ 100 mA
Response time:≤ 0.5 ms 4)
Switching frequency:1,000 Hz 5)
Connection type:Cable, 4-wire, 2 m 6)
Cable material:PVC
Conductor cross-section:0.18 mm2
Protection class:II
Circuit protection:A
B
C
D 7) 8) 9) 10)
Weight:44 g
Housing material:ABS
Optics material:PC
Ambient temperature, operation:-25 C ... 55 C
Ambient temperature, storage:-40 C ... 75 C
Polarisation filter:
Items supplied:BEF-W150-A mounting bracket, Reflector PL20A
Attenuation along light beam:> 20 %
Special Design:for transparent objects
Angle of dispersion:Ca. 7.5
AS-Interface-Chip:-
Attenuation difference of object:> 7.5 %
1) Limit values 2) May not exceed or fall short of VS 3) Without load 4) Signal transit time with resistive load 5) With light/dark ratio 1:1 6) Do not bend below 0 C 7) A = VS connections reverse-polarity protected 8) B = inputs and output reverse-polarity protected 9) C = interference suppression 10) D = outputs overcurrent and short-circuit protected


Hot Products
Reviews(0)
Write a Review

Level:
 
Name:  
Reviews: