SICK WL150-P430 (6011038)- A&S Automation Co., Ltd

Home / Sensors / Sick Sensor / SICK WL150-P430 (6011038)

Add To Cart

Reflex Photoelectric Switch WL150-P430 plug M8-4 pin

Your benefits

Polarizing filters prevent false readings on reflective surfaces, ensuring reliable object detection
Reliable detection of transparent objects
Reliable detection of objects moving at fast speeds
Highly visible red light for easy alignment

Features
Dimensions (W x H x D)::	10 mm x 28 mm x 17.5 mm
Sensing range max.:	0 m ... 2.4 m ¹⁾
Sensing range:	0.01 m ... 2 m ²⁾
Housing desig (light emission):	Cuboid
Light source:	LED ³⁾
Type of light:	visible red light
Sensitivity adjustment:	Potentiometer, 270
Sensor/detection principle:	Photoelectric retro-reflective sensor, Standard optics
¹⁾ ²⁾ PL80A ³⁾ Average service life 100,000 h at Ta = +25 C
Mechanics/electronics
Enclosure rating:	IP 67
Supply voltage:	10 V DC ... 30 V DC ¹⁾
Residual ripple:	10 % ²⁾
Power consumption:	≤ 20 mA ³⁾
Switching output:	PNP, light/dark-switching, control cable, open collector
Output current Imax.:	≤ 100 mA
Response time:	≤ 0.5 ms ⁴⁾
Switching frequency:	1,000 Hz ⁵⁾
Connection type:	Connector M8, 4-pin
Protection class:	II
Circuit protection:	A B C D ⁶⁾ ⁷⁾ ⁸⁾ ⁹⁾
Weight:	7 g
Housing material:	ABS
Optics material:	PMMA
Ambient temperature, operation:	-25 C ... 55 C
Ambient temperature, storage:	-40 C ... 75 C
Polarisation filter:
Items supplied:	BEF-W150-A mounting bracket, Reflector PL20A
Angle of dispersion:	Ca. 6
AS-Interface-Chip:	-
¹⁾ Limit values ²⁾ May not exceed or fall short of V_S ³⁾ Without load ⁴⁾ Signal transit time with resistive load ⁵⁾ With light/dark ratio 1:1 ⁶⁾ A = V_S connections reverse-polarity protected ⁷⁾ B = inputs and output reverse-polarity protected ⁸⁾ C = interference suppression ⁹⁾ D = outputs overcurrent and short-circuit protected

Hot Products

Reviews(0)

Write a Review

Hot Products