
Add To Cart
share
SICK WL190L-N132 Overview
Photoelectric reflex Switch WL190L-N132 red-light NPN, switching mode ds/ls selectable, cable 2 m
SICK WL190L-N132 Description
- Scanning range 0.01 m - 5.5 m
- Laser LED, visible red light, class 2
- User-friendly sensor, simple to align and adjust
- Sensitivity setting via control dial
- Precise autocollimation optics
- Selectable output: light/dark switching
- User friendly due to simple alignment and adjustment
- Simple alignment thanks to red light laser, class 2
- Simple adjustment with control dial
- One device, two output functions thanks to light/dark selector switch
- Reliable operation even with small distance from reflector to sensor
Your benefits
Features | |
Dimensions (W x H x D):: | 15 mm x 44.4 mm x 30 mm |
Sensing range max.: | 0.01 m ... 5.5 m 1) |
Housing desig (light emission): | Cuboid |
Light source: | Laser |
Type of light: | visible red light |
Laser class: | 2 |
Adjustment of operating distance: | Potentiometer, 1 revolution |
Sensor/detection principle: | Photoelectric retro-reflective sensor, autocollimation |
Light spot (distance): | 45 mm (5 m) |
1) P250F | |
Mechanics/electronics | |
Enclosure rating: | IP 67 |
Supply voltage: | 10 V DC ... 30 V DC 1) |
Residual ripple: | 10 % 2) |
Power consumption: | ≤ 40 mA 3) |
Switching output: | NPN, light/dark-switching, manually selectable |
Output current Imax.: | < 100 mA |
Response time: | 0.5 ms 4) |
Switching frequency: | 1,000 Hz 5) |
Connection type: | Cable, 3-wire, 2 m 6) |
Conductor cross-section: | 0.18 mm2 |
Protection class: | III 7) |
Circuit protection: | A D 8) 9) |
Weight: | 200 g |
Housing material: | ABS |
Optics material: | PMMA |
Ambient temperature, operation: | -10 C ... 40 C |
Ambient temperature, storage: | -20 C ... 60 C |
Polarisation filter: | ![]() |
Items supplied: | Reflector P250F |
1) Limit values 2) May not exceed or fall short of VS 3) Without load 4) Signal transit time with resistive load 5) With light/dark ratio 1:1 6) Do not bend below 0 C 7) Reference voltage 50 V DC 8) A = VS connections reverse-polarity protected 9) D = outputs overcurrent and short-circuit protected |