Add To Cart
share
SICK WL23-2S1530 Overview
Photoelectric reflex switch WL23-2S1530 red light, relay, cable 2 m
SICK WL23-2S1530 Description
- Two variants available: without sensitivity adjustment or with teach button
- Polarizing filter ensures reliable detection, even with shiny targets
- Model with PinPoint for intense, consistent red light spot
- 360 visibility of indicating LEDs
- Adjustability removed to prevent operator tampering and to reduce downtime
- Model with teach-in pushbutton enables quick setup
- Durable housing with reinforced mounting holes withstands harsh conditions
- 360 LEDs provide device status indication from multiple angles
- Polarizing filter ensures reliable detection, even with shiny targets
- Less downtime due to ASIC chip technology by SICK
- High level of mechanical and electronic reliability in industrial environments
Your benefits
| Features | |
| Dimensions (W x H x D):: | 24.6 mm x 80.6 mm x 54 mm |
| Sensing range max.: | 0.1 m ... 10 m 1) |
| Sensing range: | 0.3 m ... 7 m 2) |
| Housing desig (light emission): | Cuboid |
| Light source: | LED 3) |
| Type of light: | visible red light |
| Wave length: | 660 nm |
| Sensor/detection principle: | Photoelectric retro-reflective sensor |
| Light spot (distance): | 45 mm (2.7 m) |
| 1) 2) PL80A 3) Average service life 100,000 h at Ta = +25 C | |
| Mechanics/electronics | |
| Enclosure rating: | IP 67 |
| Supply voltage: | 90 V AC ... 265 V AC 1) |
| Switching output: | Relay, light switching, change-over contacts, electrically isolated 2) |
| Response time: | ≤ 10 ms |
| Switching frequency: | 10 Hz 3) |
| Connection type: | Cable, 5-wire, 2 m 4) |
| Cable material: | PVC |
| Protection class: | II 5) |
| Circuit protection: | A C 6) 7) |
| Weight: | 200 g |
| Housing material: | ABS |
| Optics material: | PMMA |
| Ambient temperature, operation: | -25 C ... 60 C 8) |
| Ambient temperature, storage: | -40 C ... 70 C |
| Polarisation filter: | ![]() |
| Special device: | - |
| Angle of dispersion: | 1.5 |
| Power consumption: | ≤ 2.5 VA |
| Switching current (switching voltage): | 3 A (230 V AC) 0.11 A (230 V DC) 3 A (24 V DC) |
| Usage category: | AC-15, DC-13, according to EN 60947-1 |
| 1) Limit values 2) Provide suitable spark supression for inductive or capacitive loads 3) With light/dark ratio 1:1 4) Do not bend below 0 C 5) Reference voltage 250 V AC 6) A = VS connections reverse-polarity protected 7) C = interference suppression 8) UL: 0 C ... +60 C | |
Contact Us
Hot Products