f SICK WL23-2S3730 (1027789)- A&S Automation Co., Ltd
 
Home / Sensors / Sick Sensor / SICK WL23-2S3730 (1027789)

Add To Cart
share


SICK WL23-2S3730 Overview



Relay 1 x u, pigtail with equipment plug 7 pin Q7 AC

SICK WL23-2S3730 Description



  • Two variants available: without sensitivity adjustment or with teach button
  • Polarizing filter ensures reliable detection, even with shiny targets
  • Model with PinPoint for intense, consistent red light spot
  • 360 visibility of indicating LEDs
  • Your benefits

  • Adjustability removed to prevent operator tampering and to reduce downtime
  • Model with teach-in pushbutton enables quick setup
  • Durable housing with reinforced mounting holes withstands harsh conditions
  • 360 LEDs provide device status indication from multiple angles
  • Polarizing filter ensures reliable detection, even with shiny targets
  • Less downtime due to ASIC chip technology by SICK
  • High level of mechanical and electronic reliability in industrial environments

Features
Dimensions (W x H x D)::24.6 mm x 80.6 mm x 54 mm
Sensing range max.: 0.1 m ... 10 m 1)
Sensing range: 0.3 m ... 7 m 2)
Housing desig (light emission):Cuboid
Light source:LED 3)
Type of light:visible red light
Wave length:660 nm
Sensor/detection principle:Photoelectric retro-reflective sensor
Light spot (distance):45 mm (2.7 m)
1) 2) PL80A 3) Average service life 100,000 h at Ta = +25 C
Mechanics/electronics
Enclosure rating:IP 67
Supply voltage:90 V AC ... 265 V AC 1)
Switching output:Relay, light switching, change-over contacts, electrically isolated 2)
Response time:≤ 10 ms
Switching frequency:10 Hz 3)
Connection type:Cable with cubic plug, 7-pin, 150 mm 4)
Cable material:PVC
Protection class:II 5)
Circuit protection:A
C
6) 7)
Weight:140 g
Housing material:ABS
Optics material:PMMA
Ambient temperature, operation:-25 C ... 60 C 8)
Ambient temperature, storage:-40 C ... 70 C
Polarisation filter:
Special device:-
Angle of dispersion:1.5
Power consumption:≤ 2.5 VA
Switching current (switching voltage):3 A (230 V AC)
0.11 A (230 V DC)
3 A (24 V DC)
Usage category:AC-15, DC-13, according to EN 60947-1
1) Limit values 2) Provide suitable spark supression for inductive or capacitive loads 3) With light/dark ratio 1:1 4) Do not bend below 0 C 5) Reference voltage 250 V AC 6) A = VS connections reverse-polarity protected 7) C = interference suppression 8) UL: 0 C ... +60 C


Hot Products
Reviews(0)
Write a Review

Level:
 
Name:  
Reviews: