f SICK WL2S-F411 (1023644)- A&S Automation Co., Ltd
 
Home / Sensors / Sick Sensor / SICK WL2S-F411 (1023644)

Add To Cart
share


SICK WL2S-F411 Overview



Photoelectric Reflex Switch WL2S-F411 slim, PNP, dark switching, cable plug 200 mm, M8, 4pin

SICK WL2S-F411 Description



  • Small, sharply defined light spot of O 10 mm at 100 mm distance
  • Maximum scanning range of 800 mm on small PL20A reflector
  • Fast response time of just 0.6 ms
  • Your benefits

  • Compact and space-saving machine design resulting from high scanning ranges onto small reflectors
  • PinPoint LED generates a sharply defined, highly visible light spot for fast and simple alignment
  • The WL2S is ideal for cases where little construction space is available but a large scanning range is required
  • Several photoelectric sensors may be installed in the tightest spaces since the small but sharply defined light spot prevents mutual interference for most part
  • Ball-and-socket bracket for fast and simple alignment

Features
Dimensions (W x H x D)::7.6 mm x 25.1 mm x 12.5 mm
Sensing range max.: 0.04 m ... 0.8 m 1)
Sensing range: 0.04 m ... 0.08 m 2)
Housing desig (light emission):Slim
Light source:PinPoint LED 3)
Type of light:visible red light
Wave length:660 nm
Adjustment:no/fix
Sensitivity adjustment:No/fix
Sensor/detection principle:Photoelectric retro-reflective sensor, Standard optics
Light spot (distance):10 mm (100 mm)
1) 2) PL20A 3) Average service life 75,000 h at Ta = +25 C
Mechanics/electronics
Enclosure rating:IP 67
IP 69K
Supply voltage:10 V DC ... 30 V DC 1)
Residual ripple:≤ 5 Vpp 2)
Switching output:PNP, Dark-switching
Output current Imax.:50
Response time:< 0.6 ms 3)
Switching frequency:800 With light/dark ratio 1:1
Connection type:Cable with plug, M8, 4-pin 200 mm 4)
Cable material:PVC
Cable diameter:2.4 mm
Circuit protection:A
C
D 5) 6) 7)
Weight:20 g
Housing material:ABS
Optics material:PMMA
Ambient temperature, operation:-20 C ... 50 C
Ambient temperature, storage:-40 C ... 75 C
Polarisation filter:
Focus adjustable:
Reverse polarity protection:
Short-circuit protection:
1) Limit values 2) 3) Signal transit time with resistive load 4) Do not bend below 0 C 5) A = VS connections reverse-polarity protected 6) C = interference suppression 7) D = outputs overcurrent and short-circuit protected


Hot Products
Reviews(0)
Write a Review

Level:
 
Name:  
Reviews: