SICK WL4-3E1330 (1028156)- A&S Automation Co., Ltd

Home / Sensors / Sick Sensor / SICK WL4-3E1330 (1028156)

Add To Cart

Photoelectric Reflex WL4-3E1330 NPN, dark switching, without adjustment, 2m cable, 3-wire

Your benefits

The PinPoint LED's sharply defined, intensive light spot makes alignment of the WL4-3 fast and simple
Low-cost integration in a machine as, unlike other types, the W4-3 can be integrated optimally in cramped installation conditions
M3 threaded metal sockets for robust mounting guaranteeing a long service life and less downtime.

Features
Dimensions (W x H x D)::	16 mm x 39.5 mm x 12 mm
Sensing range max.:	0.01 m ... 4 m ¹⁾
Sensing range:	0.02 m ... 3.5 m ²⁾
Housing desig (light emission):	Flat
Light source:	PinPoint LED ³⁾
Type of light:	visible red light
Wave length:	650 nm
Adjustment:	no/fix
Sensitivity adjustment:	No/fix
Sensor/detection principle:	Photoelectric retro-reflective sensor, Standard optics
Light spot (distance):	75 mm (1.5 m)
¹⁾ ²⁾ PL80A ³⁾ Average service life 100,000 h at Ta = +25 C
Mechanics/electronics
Enclosure rating:	IP 67 IP 66
Supply voltage:	10 V DC ... 30 V DC ¹⁾
Residual ripple:	< 5 Vpp ²⁾
Power consumption:	20 ³⁾
Switching output:	NPN, Dark-switching
Output current Imax.:	100
Response time:	< 0.5 ms ⁴⁾
Switching frequency:	1,000 With light/dark ratio 1:1
Connection type:	Cable, 3-wire 2 m ⁵⁾
Cable material:	PVC
Conductor cross-section:	0.14 mm2
Cable diameter:	3.4 mm
Protection class:	III
Circuit protection:	A C D ⁶⁾ ⁷⁾ ⁸⁾
Weight:	30 g
Housing material:	ABS
Optics material:	PMMA
Ambient temperature, operation:	-40 C ... 60 C
Ambient temperature, storage:	-40 C ... 75 C
Polarisation filter:
¹⁾ Limit values ²⁾ May not exceed or fall short of V_S tolerances ³⁾ Without load ⁴⁾ Signal transit time with resistive load ⁵⁾ Do not bend below 0 C ⁶⁾ A = VS connections reverse-polarity protected ⁷⁾ C = interference suppression ⁸⁾ D = outputs overcurrent and short-circuit protected

Hot Products

Reviews(0)

Write a Review

Hot Products