
Add To Cart
share
SICK WLL160-F420 Overview
WLL160-F420
SICK WLL160-F420 Description
- Sensitivity setting with potentiometer, scaled
- Large selection of LL3 fiber-optic cables
- Switch-off delay 0 to 100 ms
- Contamination control output and test input for equipment and system testing
Product features | |
Light source: | LED |
Type of light: | Red light |
Light spot diameter: | Depending on the scanning range |
Wave length: | 660 nm |
Sensing range min ... max (through-beam system): | 0 mm ... 2,000 mm |
Fibre-optic cable (through-beam system): | LL3-TB02 and tip adapter LL3-TA01 |
Sensing range min ... max (proximity system): | 0 mm ... 70 mm |
Fibre-optic cable (proximity system): | LL3-DB01 |
Technical data | |
Design: | cuboid |
Dimensions (W x H x D): | 12 mm x 38.5 mm x 59 mm |
Supply voltage min ... max: | DC 10 ... 30 V 1) |
Ripple: | 10 % |
Power consumption: | ≤ 30 mA |
Switching output: | PNP: open collector: Q |
Switching mode: | Light-/dark-switching via slide switch |
Output current max.: | 100 mA |
Response time: | ≤ 0.35 ms |
Switching frequency: | 1,500 Hz |
Connection type: | Connector, M8, 4-pin |
Circuit protection: | VS connections reverse-polarity protected / In-/outputs short-circuit protected / Interference suppression / Outputs overcurrent and short-circuit protected |
Enclosure rating: | IP 66 |
Ambient operation temperature, min ... max: | -25 C ... +55 C |
Ambient storage temperature, min ... max: | -40 C ... +70 C |
Weight: | ca. 30 g |
Housing material: | ABS |
Angle of dispersion: | ca. 65 |
Series: | W160 |
Time delay: | Selectable, via slide switch |
Time type: | Switch-off delay TOFF 0 ... 100 ms |
Front screen heating: | - |
Polarisation filter: | - |
Alarm output: | Contamination message, 100mA, static |
1) Limit values, reverse-polarity protected operation in short-circuit protected network max. 8 A |