
Add To Cart
share
SICK WLL170T-2P460 Overview
Photoelectric fiber optic switch WLL170T-2P460 High-Speed, LED red
SICK WLL170T-2P460 Description
- Rapid response time (50 s)
- Switching threshold adjustment via potentiometer or teach-in via button or cable
- Four different teach-in modes
- Simple installation
- Red or green emitter LED
- Reliable detection of rapid processes
- Short commissioning time saves on installation costs
- The optimum setting for every application due to different teach-in modes, making the sensor customized to the specific application
- Ideal emitted light for color or contrast detection
- Fiber optics sensor with simple handling thanks to setting via potentiometer and switch
Your benefits
Features | |
Dimensions (W x H x D):: | 10.5 mm x 35.5 mm x 83.7 mm |
Sensing range max.: | 0 mm ... 1,500 mm, through-beam system |
Sensing range: | 0 mm ... 60 mm, proximity system, LL3DM01 0 ... 300 mm, through-beam system, LL3-TB01 1) |
Light source: | LED 2) |
Type of light: | visible red light |
Wave length: | 660 nm |
Enclosure rating: | IP 66 3) |
Adjustment: | adjustable |
Sensitivity adjustment: | Adjustable |
Adjustment of operating distance: | Cable, Teach-Taste |
Teach-in: | Menu-controlled |
Time type: | Off-delayed |
Delay time: | selectable by sliding switch: >=40 ms |
Indication: | LED |
Sensor/detection principle: | Fiber-optic photoelectric sensors |
1) 2) Average service life 100,000 h at Ta = +25 C 3) With correctly attached fibre-optic cable LL3 and closed protection hood | |
Mechanics/electronics | |
Supply voltage: | 10 V DC ... 30 V DC 1) |
Residual ripple: | 10 % 2) |
Power consumption: | ≤ 30 mA 3) |
Switching output: | PNP, light/dark-switching, selectable via light/dark selector, open collector |
Output current Imax.: | ≤ 100 mA |
Response time: | ≤ 50 s 4) |
Switching frequency: | 10,000 Hz with light/dark ratio 1:1 |
Connection type: | Connector M8, 4-pin |
Number of cores: | 4 |
Protection class: | III |
Circuit protection: | A B C D 5) 6) 7) 8) |
Special device: | 0 |
Housing material: | ABS |
1) Limit values 2) May not exceed or fall short of VS 3) Without load 4) Signal transit time with resistive load 5) A = VS connections reverse-polarity protected 6) B = inputs and output reverse-polarity protected 7) C = interference suppression 8) D = outputs overcurrent and short-circuit protected | |
Ambient data | |
Ambient temperature, operation: | -25 C ... 55 C |
Ambient temperature, storage: | -40 C ... 70 C |