f SICK WT14-2P111 (1026058)- A&S Automation Co., Ltd
 
Home / Sensors / Sick Sensor / SICK WT14-2P111 (1026058)

Add To Cart
share


SICK WT14-2P111 Overview



Photoelectric Proximity Switch WT14-2P111 PNP, DC10...30V, energetic, LED-infrared, cable 2 m

SICK WT14-2P111 Description



  • Emitter LED with infrared light
  • Energetic photoelectric proximity sensor
  • Teach-in
  • Rugged plastic housing
  • Your benefits

  • Universal application possibilities and fast installation due to visible red light
  • Reliable object detection with precise background suppression
  • Comfortable and fast scanning distance setting due to 4-speed potentiometer
  • No interference from ambient light or devices mounted opposite one another
  • High availability in the field

Features
Dimensions (W x H x D)::17.6 mm x 75.5 mm x 33.5 mm
Sensing range max.: 50 mm ... 1,500 mm 1)
Sensing range: 300 mm ... 1,500 mm 2)
Housing desig (light emission):Slim
Light source:LED 3)
Type of light:Infrared light
Wave length:870 nm
Adjustment:adjustable
Sensitivity adjustment:Adjustable Teach
Teach-in:single
Sensor/detection principle:Photoelectric proximity sensor, energetic
Light spot (distance):56 mm (1,000 mm)
1) 2) Object with 90 % reflectance (referred to standard white DIN 5033) 3) Average service life 100,000 h at Ta = +25 C
Mechanics/electronics
Enclosure rating:IP 67
Supply voltage:10 V DC ... 30 V DC 1)
Residual ripple:5 Vpp 2)
Power consumption:≤ 55 mA 3)
Switching output:PNP, light/dark-switching, Complementary
Output current Imax.:≤ 100 mA
Response time:≤ 2.5 ms 4)
Switching frequency:200 Hz with light/dark ratio 1:1
Connection type:Cable, 4-wire 2 m 5)
Cable material:PVC
Number of cores:4
Circuit protection:A
C
D 6) 7) 8)
Weight:120 g
Housing material:ABS
Optics material:PMMA
Ambient temperature, operation:-25 C ... 60 C
Ambient temperature, storage:-40 C ... 70 C
Voltage supply-LED:
Output state-LED:
1) Limit values, operation in short-circuit protected network max. 8 A 2) May not exceed or fall short of VS tolerances 3) Without load 4) Signal transit time with resistive load 5) Do not bend below 0 C 6) A = VS connections reverse-polarity protected 7) C = interference suppression 8) D = outputs overcurrent and short-circuit protected


Hot Products
Reviews(0)
Write a Review

Level:
 
Name:  
Reviews: