Add To Cart
share
SICK WT23-2P2441 Overview
Photoelectric proximity switch WT23-2P2441 red light, background blanking, PNP, plug M12, 4 pins
SICK WT23-2P2441 Description
- WT23-2 photoelectric proximity sensor Background suppression
- Resistant to crosstalk from other devices
- 360 visibility of indicating LEDs
- IR or red light
- Durable housing with reinforced mounting holes withstands harsh conditions
- 360 LEDs provide device status indication from multiple angles
- Less downtime due to ASIC (application-specific integrated circuit) chip technology by SICK
- High level of mechanical and electronic reliability in industrial environments
Your benefits
| Features | |
| Dimensions (W x H x D):: | 24.6 mm x 80.6 mm x 54 mm |
| Sensing range max.: | 50 mm ... 800 mm 1) |
| Sensing range: | 100 mm ... 800 mm |
| Housing desig (light emission): | Cuboid |
| Light source: | LED 2) |
| Type of light: | visible red light |
| Wave length: | 660 nm |
| Adjustment of operating distance: | Potentiometer |
| Sensor/detection principle: | Photoelectric proximity sensor, Background blanking |
| Light spot (distance): | 30 mm (800 mm) |
| 1) Object with 90 % reflectance (referred to standard white DIN 5033) 2) Average service life 100,000 h at Ta = +25 C | |
| Mechanics/electronics | |
| Enclosure rating: | IP 67 |
| Supply voltage: | 10 V DC ... 30 V DC 1) |
| Residual ripple: | ≤ 5 Vpp 2) |
| Power consumption: | ≤ 30 mA 3) |
| Switching output: | PNP, light/dark-switching, Complementary |
| Output current Imax.: | ≤ 100 mA |
| Response time: | ≤ 2.5 ms 4) |
| Switching frequency: | 200 Hz 5) |
| Connection type: | Connector M12, 4-pin |
| Protection class: | II 6) |
| Circuit protection: | A C D 7) 8) 9) |
| Weight: | 100 g |
| Housing material: | ABS |
| Optics material: | PMMA |
| Ambient temperature, operation: | -25 C ... 60 C |
| Ambient temperature, storage: | -40 C ... 70 C |
| Signal voltage PNP HIGH / LOW: | approx. VS - 2.5 V / 0 V |
| Special device: | - |
| 1) Limit values, operation in short-circuit protected network max. 8 A 2) May not exceed or fall short of VS 3) Without load 4) Signal transit time with resistive load 5) With light/dark ratio 1:1 6) Reference voltage 50 V DC 7) A = VS connections reverse-polarity protected 8) C = interference suppression 9) D = outputs overcurrent and short-circuit protected | |
Contact Us
Hot Products