f SICK WT23-2P3441 (1028066)- A&S Automation Co., Ltd
 
Home / Sensors / Sick Sensor / SICK WT23-2P3441 (1028066)

Add To Cart
share




SICK WT23-2P3441 Overview



Photoelectric proximity switch WT23-2P3441 red light, background blanking, PNP, pigtail with plug M12, 4 pins

SICK WT23-2P3441 Description



  • WT23-2 photoelectric proximity sensor Background suppression
  • Resistant to crosstalk from other devices
  • 360 visibility of indicating LEDs
  • IR or red light
  • Your benefits

  • Durable housing with reinforced mounting holes withstands harsh conditions
  • 360 LEDs provide device status indication from multiple angles
  • Less downtime due to ASIC (application-specific integrated circuit) chip technology by SICK
  • High level of mechanical and electronic reliability in industrial environments

Features
Dimensions (W x H x D)::24.6 mm x 80.6 mm x 54 mm
Sensing range max.: 50 mm ... 800 mm 1)
Sensing range: 100 mm ... 800 mm
Housing desig (light emission):Cuboid
Light source:LED 2)
Type of light:visible red light
Wave length:660 nm
Adjustment of operating distance:Potentiometer
Sensor/detection principle:Photoelectric proximity sensor, Background blanking
Light spot (distance):30 mm (800 mm)
1) Object with 90 % reflectance (referred to standard white DIN 5033) 2) Average service life 100,000 h at Ta = +25 C
Mechanics/electronics
Enclosure rating:IP 67
Supply voltage:10 V DC ... 30 V DC 1)
Residual ripple:≤ 5 Vpp 2)
Power consumption:≤ 30 mA 3)
Switching output:PNP, light/dark-switching, Complementary
Output current Imax.:≤ 100 mA
Response time:≤ 2.5 ms 4)
Switching frequency:200 Hz 5)
Connection type:Cable with plug, M12, 4-pin, 270 mm 6)
Cable material:PVC
Protection class:II 7)
Circuit protection:A
C
D 8) 9) 10)
Weight:120 g
Housing material:ABS
Optics material:PMMA
Ambient temperature, operation:-25 C ... 60 C
Ambient temperature, storage:-40 C ... 70 C
Signal voltage PNP HIGH / LOW:approx. VS - 2.5 V / 0 V
Special device:-
1) Limit values, operation in short-circuit protected network max. 8 A 2) May not exceed or fall short of VS 3) Without load 4) Signal transit time with resistive load 5) With light/dark ratio 1:1 6) Do not bend below 0 C 7) Reference voltage 50 V DC 8) A = VS connections reverse-polarity protected 9) C = interference suppression 10) D = outputs overcurrent and short-circuit protected



Hot Products
Reviews(0)
Write a Review

Level:
 
Name:  
Reviews: