f SICK WT27L-2F430 (1016019)- A&S Automation Co., Ltd
 
Home / Sensors / Sick Sensor / SICK WT27L-2F430 (1016019)

Add To Cart
share




SICK WT27L-2F430 Overview



Photoelectric Proximity Switch WT27L-2F430,Laser, Plug M12, 4pin

SICK WT27L-2F430 Description



  • 2 mm diameter light spot at a distance of 400 mm
  • Precise setting of background suppression
  • Laser LED with visible red light
  • Simple scanning distance setting via potentiometer
  • UL approval
  • Your benefits

  • Highly precise detection of very small parts up to a distance of 400 mm due to 2 mm miniature light spot
  • Highly visible red light for better alignment and quick commissioning
  • Extremely vibration-resistant and hence more independent of ambient conditions

Features
Dimensions (W x H x D)::24.6 mm x 80 mm x 53.5 mm
Sensing range max.: 100 mm ... 800 mm 1)
Sensing range: 100 mm ... 800 mm
Light source:Laser 2)
Type of light:visible red light
Laser class:2 (IEC 825), low power. Eyes normally protected by averting reaction and eyelid closing reflex
Adjustment of operating distance:Potentiometer
Sensor/detection principle:Photoelectric proximity sensor, Background suppression
Light spot (distance):2 mm (400 mm)
1) Object with 90 % reflectance (referred to standard white DIN 5033) 2) Average service life 50,000 h at Ta = +25 C
Mechanics/electronics
Enclosure rating:IP 67
Supply voltage:10 V DC ... 30 V DC 1)
Residual ripple:≤ 5 % 2)
Power consumption:≤ 35 mA 3)
Switching output:PNP, light/dark-switching, Complementary
Output current Imax.:100 mA
Response time:< 500 s 4)
Switching frequency:1,000 Hz with light/dark ratio 1:1
Connection type:Connector M12, 4-pin
Protection class:II 5)
Circuit protection:A
C
D 6) 7) 8)
Weight:100 g
Housing material:ABS
Ambient temperature, operation:-10 C ... 45 C
Ambient temperature, storage:-10 C ... 75 C
1) Limit values 2) May not exceed or fall short of VS 3) Without load 4) Signal transit time with resistive load 5) Reference voltage 50 V DC 6) A = VS connections reverse-polarity protected 7) C = interference suppression 8) D = outputs overcurrent and short-circuit protected



Hot Products
Reviews(0)
Write a Review

Level:
 
Name:  
Reviews: