Add To Cart
share
SICK WTB190TL-N132 Overview
Photoelectric Proximity Switch WTB190TL-N132 Laser redlight, NPN, switching mode programmable, Teach-In, timer function, display, cable 2 m
SICK WTB190TL-N132 Description
- Scanning distance, far range: 100 mm - 270 mm
- Scanning distance, near range: 40 mm - 100 mm
- Laser LED, visible red light, class 2
- Scanning distance setting by means of teach-in process
- Programmable background or foreground suppression
- Programmable output: light/dark switching
- Numerical display with menu navigation
- Simple alignment thanks to red light laser, class 2
- Fast configuration by means of display with menu navigation
- Specific setup due to wide range of functions
- Scanning distance setting by means of teach-in process
Your benefits
| Features | |
| Dimensions (W x H x D):: | 15 mm x 44.4 mm x 30 mm |
| Sensing range max.: | 40 mm ... 100 mm 1) |
| Housing desig (light emission): | Cuboid |
| Light source: | Laser |
| Type of light: | visible red light |
| Teach-in: | single, Menu-controlled |
| Laser class: | 2 |
| Delay time: | Nor: normal mode: Ond: On delay mode, reactivation delay: OFd: Off-delay mode, release delay: OnE: One Shot Mode, ONE SHOT: |
| Adjustment of operating distance: | Teach |
| Time type: | Programmable Programmable: 0 ... 10 s |
| Sensor/detection principle: | Photoelectric proximity sensor, Background suppression |
| Light spot (distance): | 0.8 mm (80 mm) |
| 1) Object with 90 % reflectance (referred to standard white DIN 5033) | |
| Mechanics/electronics | |
| Enclosure rating: | IP 67 |
| Supply voltage: | 10 V DC ... 30 V DC 1) |
| Residual ripple: | 10 % 2) |
| Power consumption: | ≤ 40 mA 3) |
| Switching output: | NPN, light/dark-switching, programmable |
| Output current Imax.: | < 100 mA |
| Response time: | 1.5 ms 4) |
| Switching frequency: | 300 Hz 5) |
| Connection type: | Cable, 4-wire, 2 m 6) |
| Conductor cross-section: | 0.18 mm2 |
| Protection class: | III 7) |
| Circuit protection: | A D 8) 9) |
| Weight: | 200 g |
| Housing material: | ABS |
| Optics material: | PMMA |
| Ambient temperature, operation: | -10 C ... 40 C |
| Ambient temperature, storage: | -20 C ... 60 C |
| 1) Limit values 2) May not exceed or fall short of VS 3) Without load 4) Signal transit time with resistive load 5) With light/dark ratio 1:1 6) Do not bend below 0 C 7) Reference voltage 50 V DC 8) A = VS connections reverse-polarity protected 9) D = outputs overcurrent and short-circuit protected | |
Contact Us
Hot Products