f SICK WTB190TL-P132 (6026541)- A&S Automation Co., Ltd
Home / Sensors / Sick Sensor / SICK WTB190TL-P132 (6026541)

Add To Cart

SICK WTB190TL-P132 Overview

Photoelectric Proximity Switch WTB190TL-P132 Laser red light, PNP, switching mode programmable, Teach-In, timer funktion, display, cable 2 m

SICK WTB190TL-P132 Description

  • Scanning distance, far range: 100 mm - 270 mm
  • Scanning distance, near range: 40 mm - 100 mm
  • Laser LED, visible red light, class 2
  • Scanning distance setting by means of teach-in process
  • Programmable background or foreground suppression
  • Programmable output: light/dark switching
  • Numerical display with menu navigation
  • Your benefits

  • Simple alignment thanks to red light laser, class 2
  • Fast configuration by means of display with menu navigation
  • Specific setup due to wide range of functions
  • Scanning distance setting by means of teach-in process

Dimensions (W x H x D)::15 mm x 44.4 mm x 30 mm
Sensing range max.: 40 mm ... 100 mm 1)
Housing desig (light emission):Cuboid
Light source:Laser
Type of light:visible red light
Teach-in:single, Menu-controlled
Laser class:2
Delay time:Nor: normal mode:
Ond: On delay mode, reactivation delay:
OFd: Off-delay mode, release delay:
OnE: One Shot Mode, ONE SHOT:
Adjustment of operating distance:Teach
Time type:Programmable
Programmable: 0 ... 10 s
Sensor/detection principle:Photoelectric proximity sensor, Background suppression
Light spot (distance):0.8 mm (80 mm)
1) Object with 90 % reflectance (referred to standard white DIN 5033)
Enclosure rating:IP 67
Supply voltage:10 V DC ... 30 V DC 1)
Residual ripple: 10 % 2)
Power consumption:≤ 40 mA 3)
Switching output:PNP, light/dark-switching, programmable
Output current Imax.:< 100 mA
Response time:1.5 ms 4)
Switching frequency:300 Hz 5)
Connection type:Cable, 4-wire, 2 m 6)
Conductor cross-section:0.18 mm2
Protection class:III 7)
Circuit protection:A
D 8) 9)
Weight:200 g
Housing material:ABS
Optics material:PMMA
Ambient temperature, operation:-10 C ... 40 C
Ambient temperature, storage:-20 C ... 60 C
1) Limit values 2) May not exceed or fall short of VS 3) Without load 4) Signal transit time with resistive load 5) With light/dark ratio 1:1 6) Do not bend below 0 C 7) Reference voltage 50 V DC 8) A = VS connections reverse-polarity protected 9) D = outputs overcurrent and short-circuit protected

Hot Products
Write a Review