
Add To Cart
share
SICK WTB190TL-P162 Overview
Photoelectric Proximity Switch WTB190TL-P162 Laser red light, PNP, swtiching mode programmable, Teach-In, timer function, display, cable 2 m
SICK WTB190TL-P162 Description
- Scanning distance, far range: 100 mm - 270 mm
- Scanning distance, near range: 40 mm - 100 mm
- Laser LED, visible red light, class 2
- Scanning distance setting by means of teach-in process
- Programmable background or foreground suppression
- Programmable output: light/dark switching
- Numerical display with menu navigation
- Simple alignment thanks to red light laser, class 2
- Fast configuration by means of display with menu navigation
- Specific setup due to wide range of functions
- Scanning distance setting by means of teach-in process
Your benefits
Features | |
Dimensions (W x H x D):: | 15 mm x 44.4 mm x 30 mm |
Sensing range max.: | 100 mm ... 270 mm 1) |
Housing desig (light emission): | Cuboid |
Light source: | Laser |
Type of light: | visible red light |
Teach-in: | single, Menu-controlled |
Laser class: | 2 |
Delay time: | Nor: normal mode: Ond: On delay mode, reactivation delay: OFd: Off-delay mode, release delay: OnE: One Shot Mode, ONE SHOT: |
Adjustment of operating distance: | Teach |
Time type: | Programmable Programmable: 0 ... 10 s |
Sensor/detection principle: | Photoelectric proximity sensor, Background suppression |
Light spot (distance): | 1.5 mm (200 mm) |
1) Object with 90 % reflectance (referred to standard white DIN 5033) | |
Mechanics/electronics | |
Enclosure rating: | IP 67 |
Supply voltage: | 10 V DC ... 30 V DC 1) |
Residual ripple: | 10 % 2) |
Power consumption: | ≤ 40 mA 3) |
Switching output: | PNP, light/dark-switching, programmable |
Output current Imax.: | < 100 mA |
Response time: | 1.5 ms 4) |
Switching frequency: | 300 Hz 5) |
Connection type: | Cable, 4-wire, 2 m 6) |
Conductor cross-section: | 0.18 mm2 |
Protection class: | III 7) |
Circuit protection: | A D 8) 9) |
Weight: | 200 g |
Housing material: | ABS |
Optics material: | PMMA |
Ambient temperature, operation: | -10 C ... 40 C |
Ambient temperature, storage: | -20 C ... 60 C |
1) Limit values 2) May not exceed or fall short of VS 3) Without load 4) Signal transit time with resistive load 5) With light/dark ratio 1:1 6) Do not bend below 0 C 7) Reference voltage 50 V DC 8) A = VS connections reverse-polarity protected 9) D = outputs overcurrent and short-circuit protected |