
Add To Cart
share
SICK WTB27X-3P1811 Overview
WTB27X-3P1811 Photoelectric Proximity Switch
SICK WTB27X-3P1811 Description
- Marking: EX II 3D IP67 T70C, EX II 3G EEx nA II T4 X according to Directive 94/9/EC (ATEX)
- Corresponds to 3D/3G category
- Conform with standards and ready-to-install: Sensor + protective housing (stainless steel 1.4301)
- Large scanning distances with IR LED
- Precise background suppression with no scanning distance drift
- Reliable operation in industrial environments - with ambient light, optical reflections and when devices are mounted opposite one another
- Ready-to-install sensors conform with the 3G/3D category for explosive zones (ATEX)
- Very precise detection with no scanning distance drift in case of vibrations
- Less downtime due to ASIC chip technology by SICK
- Reliable in operation with ambient light, optical reflections, and when devices are mounted opposite one another
Your benefits
Features | |
Dimensions (W x H x D):: | 31.4 mm x 112.3 mm x 70.4 mm |
Sensing range max.: | 30 mm ... 1,600 mm 1) |
Sensing range: | 100 mm ... 1,600 mm |
Housing desig (light emission): | Cuboid |
Light source: | LED 2) |
Type of light: | Infrared light |
Wave length: | 880 nm |
Adjustment of operating distance: | Potentiometer |
Sensor/detection principle: | Photoelectric proximity sensor, Background suppression |
Light spot (distance): | 25 mm (800 mm) |
1) Object with 90 % reflectance (referred to standard white DIN 5033) 2) Average service life 100,000 h at Ta = +25 C | |
Mechanics/electronics | |
Enclosure rating: | IP 67 |
Supply voltage: | 10 V DC ... 30 V DC 1) |
Residual ripple: | ≤ 5 Vpp 2) |
Power consumption: | ≤ 40 mA 3) |
Switching output: | PNP, light/dark-switching, Complementary |
Output current Imax.: | ≤ 100 mA |
Response time: | ≤ 1.5 ms 4) |
Switching frequency: | 350 Hz 5) |
Connection type: | Cable, 4-wire 10 m 6) |
Cable material: | PVC |
Protection class: | II 7) |
Circuit protection: | A B C 8) 9) 10) |
Weight: | 750 g |
Housing material: | ABS, Stainless steel 1.4301 |
Optics material: | PMMA |
Ambient temperature, operation: | -20 C ... 50 C |
Ambient temperature, storage: | -40 C ... 75 C |
Signal voltage PNP HIGH / LOW: | approx. VS - 2.5 V / 0 V |
Ex marking (ATEX): | EX II 3D IP67 T70 C Ex II 3G EEx nA II T4 X |
Hazardous area category: | 3D, 3G |
1) Limit values, operation in short-circuit protected network max. 8 A 2) May not exceed or fall short of VS 3) Without load 4) Signal transit time with resistive load 5) With light/dark ratio 1:1 6) Do not bend below 0 C 7) Reference voltage 50 V DC 8) A = VS connections reverse-polarity protected 9) B = inputs and output reverse-polarity protected 10) C = interference suppression |