
Add To Cart
share
SICK WTE23-2P2412 Overview
Photoelectric proximity switch WTE23-2P2412 Infrared light, energetic, PNP, plug M12, 4 pins
SICK WTE23-2P2412 Description
- WTE23-2 energetic photoelectric proximity with a sensing range up to 2,300 mm
- Teach-in pushbutton: teach and ready!
- IR LED for long sensing ranges
- 360 visibility of indicating LEDs
- Durable housing with reinforced mounting holes withstands harsh conditions
- Teach-in pushbutton enables quick sensing range adjustment
- 360 LEDs provide device status indication from multiple angles
- Less downtime due to ASIC chip technology by SICK
- High level of mechanical and electronic reliability in industrial environments
Your benefits
Features | |
Dimensions (W x H x D):: | 24.6 mm x 80.6 mm x 54 mm |
Sensing range max.: | 50 mm ... 2,300 mm 1) |
Sensing range: | 30 mm ... 2,000 mm |
Housing desig (light emission): | Cuboid |
Light source: | LED 2) |
Type of light: | Infrared light |
Wave length: | 880 nm |
Adjustment of operating distance: | Potentiometer |
Sensor/detection principle: | Photoelectric proximity sensor, energetic |
Light spot (distance): | 160 mm (2,000 mm) |
1) Object with 90 % reflectance (referred to standard white DIN 5033) 2) Average service life 100,000 h at Ta = +25 C | |
Mechanics/electronics | |
Enclosure rating: | IP 67 |
Supply voltage: | 10 V DC ... 30 V DC 1) |
Residual ripple: | ≤ 5 Vpp 2) |
Power consumption: | ≤ 35 mA 3) |
Switching output: | PNP, light/dark-switching, Complementary |
Output current Imax.: | ≤ 100 mA |
Response time: | ≤ 2.5 ms 4) |
Switching frequency: | 200 Hz 5) |
Connection type: | Connector M12, 4-pin |
Protection class: | II 6) |
Circuit protection: | A C D 7) 8) 9) |
Weight: | 100 g |
Housing material: | ABS |
Optics material: | PMMA |
Ambient temperature, operation: | -25 C ... 60 C |
Ambient temperature, storage: | -40 C ... 70 C |
Signal voltage PNP HIGH / LOW: | approx. VS - 2.5 V / 0 V |
1) Limit values, operation in short-circuit protected network max. 8 A 2) May not exceed or fall short of VS 3) Without load 4) Signal transit time with resistive load 5) With light/dark ratio 1:1 6) Reference voltage 50 V DC 7) A = VS connections reverse-polarity protected 8) C = interference suppression 9) D = outputs overcurrent and short-circuit protected |