SICK WTV4-3P3441 (1029582)- A&S Automation Co., Ltd

Home / Sensors / Sick Sensor / SICK WTV4-3P3441 (1029582)

Add To Cart

Optical Proximity Sensor

Sensing range from 4 - 50 mm
Reliable detection of planar, highly transparent and shiny objects at distances of 20 to 25 mm
5-turn potentiometer for precise adjustment
Large, consistent light spot
Rugged plastic housing with M3 threaded metal inserts
IR versions available for detection of jet-black objects with a remission < 1%
Versions available with linear light spot

Your benefits

Low-cost machine design since shiny and transparent objects are directly detected, making a separate reflector or through-beam system unnecessary
Less mounting and setup time since no alignment is required
Rugged mounting system with M3 threaded metal inserts reduces maintenance costs due to a long service life
Reliable object detection due to best-in-class background suppression and high immunity to ambient light

Features
Dimensions (W x H x D)::	16 mm x 39.5 mm x 12 mm
Sensing range max.:	4 mm ... 50 mm
Sensing range:	15 mm ... 50 mm
Housing desig (light emission):	Cuboid, Flat
Light source:	PinPoint LED ¹⁾
Type of light:	visible red light
Wave length:	650 nm
Sensitivity adjustment:	Potentiometer, 5-turn
Sensor/detection principle:	Photoelectric proximity sensor, Background suppression
Light spot (distance):	10 mm (40 mm)
¹⁾ Average service life 100,000 h at Ta = +25 C
Mechanics/electronics
Enclosure rating:	IP 67 IP 66
Supply voltage:	10 V DC ... 30 V DC ¹⁾
Residual ripple:	< 5 Vpp ²⁾
Power consumption:	≤ 30 mA ³⁾
Switching output:	PNP, light/dark-switching
Output current Imax.:	≤ 100 mA
Response time:	< 0.5 ms ⁴⁾
Switching frequency:	1,000 Hz ⁵⁾
Connection type:	Cable with plug, M12, 4-pin, 150 mm ⁶⁾
Cable material:	PVC
Conductor cross-section:	0.14 mm2
Cable diameter:	3.4 mm
Protection class:	III
Circuit protection:	A C D ⁷⁾ ⁸⁾ ⁹⁾
Weight:	30 g
Housing material:	ABS
Optics material:	PMMA
Ambient temperature, operation:	-40 C ... 60 C
Ambient temperature, storage:	-40 C ... 75 C
¹⁾ Limit values ²⁾ May not exceed or fall short of V_S tolerances ³⁾ Without load ⁴⁾ Signal transit time with resistive load ⁵⁾ With light/dark ratio 1:1 ⁶⁾ Do not bend below 0 C ⁷⁾ A = V_S connections reverse-polarity protected ⁸⁾ C = interference suppression ⁹⁾ D = outputs overcurrent and short-circuit protected

Hot Products

Reviews(0)

Write a Review

Hot Products