
Add To Cart
share
SICK ZLM1-B5612E41 Overview
ZLM1-B5612E41 Logic box OFF-delay (0-2s), solenoid valve: open when de-engergised, 0 up to 8 bar
SICK ZLM1-B5612E41 Description
- Solenoid valve for controlling the actuator
- Integrated logic ensures controlled flow of goods on conveyor systems, e.g. single feed, block feed, single release, or block release
- Facility for connecting any binary sensor, e.g., optoelectronic, inductive, etc.
- Connecting cable for sensors mounted farther away
- Installation in the conveyor's side tray
- The ideal standalone solution, saving on cabling, simplifying control, and permitting clearly structured, modular expansion of conveyor systems
- Space-saving and protected mounting, integration below conveying level
- Controlled flow of goods with starting/stopping within a conveyor belt - easy and reliable
- Short restart time as well as simple troubleshooting and maintenance of conveyor systems due to controlled material flow - and therefore reduced costs.
- Flexible process engineering through modularity
Your benefits
Features | |
Enclosure rating: | IP 40 |
Dimensions (W x H x D):: | 31 mm x 93 mm x 74 mm |
Sensor principle: | Logic module |
Time type: | Time delay off |
Delay time: | 0 ... 2 s |
Mechanics/electronics | |
Switching output: | PNP |
Housing material: | ABS |
Weight: | 170 g |
Supply voltage: | 21.6 V DC ... 27.6 V DC 1) |
Residual ripple: | < 5 Vpp 2) |
Power consumption: | < 25 mA 3) |
Signal voltage PNP HIGH / LOW: | approx. VS - < 2.0 V / 0 V |
Output current Imax.: | ≤ 100 mA |
Connection type: | Cable with receptacle, M12, 4-pin 1.1 m 4) |
Number of cores: | 4 |
VDE protection class: | II |
Circuit protection: | A C D 5) 6) 7) |
Number of sensors in series: | ca. 28 8) |
Actuator control: | pneumatic |
Logical functions: | slug release, single release, individual feed |
Media connector: | compressed air or neutral gases filtered, non-lubricated or lubricated |
Design solenoid valve: | 3/2-way valve 9) |
Mode of operation solenoid valve: | air-to-drive |
Connection type solenoid valve: | instant-plug-in connector control line 4 mm diameter, instant-plug-in connector compressed air 8 mm diameter |
Coil voltage: | 24 V DC |
Coil performance: | 2 W |
Air flow rate: | ca. 20 Nl/min 10) |
Operating pressure range: | 0.5 bar ... 8 bar 11) |
Ventilation capacity: | ca. 100 Nl/min 12) |
Cable material: | PVC |
Connection for adjacent ZLR: | Connector M12, 4-pin |
Connection for sensor: | Cable with receptacle, M12, 4-pin 13) |
1) Limit values, the device may connect only to protected extra low voltage 2) May not exceed or fall short of VS 3) Without load, without valve 4) Do not bend below 0 C 5) A = VS connections reverse-polarity protected 6) C = interference suppression 7) D = outputs overcurrent and short-circuit protected 8) Maximum per power supply at 26.4 V DC, dependent on current power consumption by the sensor 9) Other valve types available on request 10) P - A 11) In combination with cylinders with small air volume we recommend tests 12) A - R 13) Connection of reflex switch PNP light switching. For the connection of proximity switch PNP dark switching and inductive sensor PNP normally closed, an additional adapter is required to put pin 2 at the sensor to pin 4 for the ZLM | |
Ambient data | |
Ambient temperature, operation: | -10 C ... 55 C |
Ambient temperature, storage: | -25 C ... 75 C |