
Add To Cart
share
Sick AODG-N1 Overview
AODG-N1 OD Max Transparent amplifier unit NPN
Sick AODG-N1 Description
- Several measurement ranges from 24 ... 26 mm up to 250 450 mm
- CMOS receiving element for measurement independent of surface
- High measurement accuracy and frequency
- Variety of selectable integrated calculations based on values from two sensors
- Safe, laser technology for precise measurement or detection of very small objects
- Several analog and switching output options
- Minimum machine downtime due to its reliability on any surface, regardless of gloss or color
- Highly accurate measurement, even during the production process, ensures high product quality
- High measuring frequency of 10 kHz increases processing speeds and reduces cycle times
- Reduce the cost to change your process by making a reference measurement using two sensors
- Comparatively low investment costs for challenging measuring tasks
- An easy-to- read LC display and simple push-button keypad programming ensures simple setup and servicing
- Reduced material costs, when using the distance sensors to control cost-relevant production processes
Your benefits
Performance | |
Output rate: | 10 kHz |
Additional features: | 8 memory banks, Arithmetic calculations, Automatic sensitivity adjustment, Set hysterisis, Frequency filters, Hold functions, Peak measurement, Internal data recorder, Manual sensitivity adjustment, Averaging settings 1 ... 4,096 x, Scaling of analog outputs, Set levels of switching outputs, Switching window, Peak to peak measurement, Bottom measurement, Timer functions |
System part: | OD Max controller (used in combination with OD25) |
Note: | Measuring range, accuracy, response time etc. depend on used sensor heads (see associated products) |
Response time: | 0.5 ms 1) |
1) Automatic sensitivity adjustment ? 2 ms | |
Interfaces | |
In- and outputs: | NPN |
Analog current outputs (max. load): | 2 x 4 ... 20 mA (≤ 300 Ω) 1) |
Analog votage outputs (min. load): | 2 x -5 ... +5 V (≥ 1 kΩ) 2) |
Resolution analog outputs: | 16 Bit |
Switching outputs (max. output current): | 5x (100 mA / High = Us, Low ≤ 2 V) 3) |
Error output (max. output current): | 2x (100 mA / High = Us, Low ≤ 2 V) |
Reference inputs: | 2x (High = ≤ 2.8 V, Low = Us) |
Inputs for memory bank selection: | 3x (High = ≤ 2.8 V, Low = Us) |
Hold inputs: | 3x (High = ≤ 2.8 V, Low = Us) |
Interface: | RS-232 |
1) 2) One for each sensor head or one for the calculation result 3) For the calculation result | |
Mechanics/electronics | |
Supply voltage Vs: | DC 12 V ... 24 V , -5 % / + 10 % |
Power consumption: | 9 W 1) |
Warm up time: | <= 5 min |
Housing material: | Polycarbonat and nylon 66 |
Connection type: | Terminal board |
Indication: | LCD display |
Typ. weightwithout cable: | 240 g |
1) When connected with two sensor heads, including analog current output | |
Ambient data | |
Enclosure rating: | IP 20 |
Ambient temperature: | Operation: -10 ... 40 C Storage: -20 ... 60 C |
Max. rel. humidity (not condensing): | 0.35 % ... 0.85 % |
Vibration resistance: | 10 Hz ... 55 Hz, Amplitude 1.5 mm, 2 h for axes XYZ |
Shock resistance: | 50 G |
Protection class: | III |