Add To Cart
share
Sick GTE6-N1211 Description
- PinPoint LED for a bright, precise light spot
- Durable metal threaded inserts
- SICK ASIC technology - the result of decades of experience in photoelectric sensors
- Large, user-friendly potentiometer
- Large, bright indicator LEDs
- IP 67 enclosure rating
- Easy alignment and precise object detection due to a highly visible PinPoint LED
- Quick and easy mounting and high durability due to threaded metal inserts
- SICK ASIC technology provides high performance, excellent reliability and crosstalk immunity
- Easy to adjust due to large, user-friendly potentiometers
- Easy to monitor due to large, bright indicator LEDs
- Easy installation with SICK accessories
Your benefits
Features | |
Dimensions (W x H x D):: | 12 mm x 31.5 mm x 21 mm |
Sensing range max.: | 300 mm 1) |
Sensing range: | 250 mm |
Housing desig (light emission): | Cuboid |
Light source: | PinPoint LED 2) |
Type of light: | visible red light |
Wave length: | 650 nm |
Sensitivity adjustment: | Potentiometer, 5-turn |
Sensor/detection principle: | Photoelectric proximity sensor, energetic |
Light spot (distance): | 7 mm (90 mm) |
1) Object with 90 % reflectance (referred to standard white DIN 5033) 2) Average service life of 100,000 h at TA = +25 C | |
Mechanics/electronics | |
Enclosure rating: | IP 67 |
Supply voltage: | 12 V DC ... 24 V DC 1) |
Residual ripple: | 10 % 2) |
Power consumption: | ≤ 30 mA 3) |
Switching output: | NPN, light/dark-switching, selectable via light/dark selector, open collector |
Output current Imax.: | 100 |
Response time: | < 1.25 s 4) |
Switching frequency: | 500 Hz 5) |
Connection type: | Cable, 3-wire, 2 m 6) |
Cable material: | PVC |
Conductor cross-section: | 0.14 mm2 |
Circuit protection: | A B D 7) 8) 9) |
Weight: | 60 g |
Housing material: | ABS/PC |
Optics material: | PMMA |
Ambient temperature, operation: | -25 C ... 55 C |
Ambient temperature, storage: | -40 C ... 70 C |
Polarisation filter: | - |
Signal voltage NPN HIGH / LOW: | approx. VS / ca. 3 V |
AS-Interface-Chip: | - |
1) Limit values, operation in short-circuit protected network max. 8 A 2) May not exceed or fall short of VS 3) Without load 4) Signal transit time with resistive load 5) With light/dark ratio 1:1 6) Do not bend below 0 C 7) A = VS connections reverse-polarity protected 8) B = inputs and output reverse-polarity protected 9) D = outputs overcurrent and short-circuit protected |