f Sick KT10W-2P1115 (1028232)- A&S Automation Co., Ltd
 
Home / Sensors / Sick Sensor / Sick KT10W-2P1115 (1028232)

Add To Cart
share


Sick KT10W-2P1115 Overview



Contrast Scanner KT10W-2P1115 PNP, 12,5mm, M12/5pin, Light-spot lengthwise

Sick KT10W-2P1115 Description



  • Very low jitter (< 10 s)
  • Precise light spot
  • Maximum detection reliability due to 3-color RGB LED technology
  • Two interchangeable light exits
  • Five storage banks for settings
  • Automatic drift correction
  • Fast switching frequency of 25 kHz
  • Easy-to-read bar graph display
  • Your benefits

  • Precise detection of print marks enables optimal results for packaging and printing applications
  • All contrast marks, even pale yellow on white paper, can be reliably detected due to RGB LED technology
  • Automatic drift correction helps detect difficult-to-see marks, such as faded print marks, enabling higher production reliability
  • Reliable operation, even with high-gloss reflective surfaces, increases throughput
  • Simple teach-in via an external signal can be performed while the material is moving, enabling shorter setup time
  • Long-lasting, tough metal housing

Features
Dimensions (L x W x H):80 mm x 30.4 mm x 53 mm
Sensing distance 1):10 mm
Sensingdistance tolerance: 3 mm
Light source 2) 3):LED red, green, blue
Light emission:Long and short side of housing, exchangeable
Light spot size:0.8 mm x 4 mm
Light spot direction 4):Vertical
Adjustment:Static 2-point teach-in, Dynamic teach-in (min/max)
Function:Automatic drift correction
1) From front edge of lens 2) Average service life of 100,000 h at TA = +25 C 3) Wave length: 470 nm, 525 nm,640 nm 4) In relationto long side of housing
Mechanics/electronics
Supply voltage Vs 1):DC 10 V ... 30 V
Residual ripple 2):≤ 5 Vpp
Power consumption 3):< 120 mA
Switching frequency 4):25 kHz
Response time 5):20 s
Jitter:< 10 s
Switching output:PNP: HIGH = VS-≤ 2 V / LOWapprox. 0 V
Switching output:PNP
Input, teach-in (ET):PNP:
Teach: U= 10 V... < UV
Run: U < 2 V
Input, blanking input (AT) 6):PNP:
blanked: U > 10 V ... < Uv
free-running: U < 2 V
Retention time (ET):25 ms, non-volatile memory
Time delay:20 ms, adjustable
Connection type:Connector M12, 5-pin
Protection class 7):II
Circuit protection:Output Q short-circuit protected, Outputs overcurrent and short-circuit protected, Interference suppression, VS connections reverse-polarity protected
Enclosure rating:IP 67
Weight:Ca. 400 g
Housing material:Die-cast zinc
Output current Imax.:100 mA
1) Limit values: operation in short-circuit protected network max. 8 A 2) May not exceed or fall short of VS tolerances 3) Without load 4) With light/dark ratio 1:1 5) Signal transit time with resistive load 6) AT > 200 s 7) Reference voltage DC 50 V
Ambient data
Ambient temperature:Operation: -10 ... 55 C
Storage: -10 ... 75 C
Shock load:according to IEC 60068


Hot Products
Reviews(0)
Write a Review

Level:
 
Name:  
Reviews: