Add To Cart
share
Sick KT10W-N2115 Overview
Contrast Scanner KT10W-N2115, DC 12-30V, NPN, M12 plug 5 pin, scanning distance 12,5mm, Green, Red and Blue light, Teach In, switching frequency 25 kHz, light spot orientation crosswise
Sick KT10W-N2115 Description
- Very low jitter (< 10 s)
- Precise light spot
- Best contrast resolution thanks to RGB LED technology
- Two interchangeable light exits
- Five storage banks for settings
- Automatic drift correction
- Fast switching frequency of 25 kHz
- Easy-to-read bar graph display
- Very precise detection of print marks enables optimal results for packaging and printing applications
- All contrast marks, even pale yellow on white paper, can be reliably detected thanks to RGB LED technology
- Automatic drift correction helps detect difficult to see marks, such as faded print marks, enabling higher production reliability
- Reliable operation, even with high-gloss reflective surfaces, increasing throughput
- Simple teach-in via an external signal can be performed while the material is moving, enabling shorter setup time
- Long-lasting, tough metal housing
Your benefits
| Features | |
| Dimensions (L x W x H): | 80 mm x 30.4 mm x 53 mm |
| Sensing distance 1): | 12.5 mm |
| Sensingdistance tolerance: | 2 mm |
| Light source 2) 3): | LED red, green, blue |
| Light emission: | Short side of housing |
| Light spot size: | 0.8 mm x 4 mm |
| Light spot direction 4): | Horizontal |
| Adjustment: | Dynamic teach-in (min/max) |
| Function: | Deactivation delay ...20 ms |
| 1) From front edge of lens 2) Average service life of 100,000 h at TA = +25 C 3) Wave length: 470 nm, 525 nm,640 nm 4) In relationto long side of housing | |
| Mechanics/electronics | |
| Supply voltage Vs 1): | DC 12 V ... 30 V |
| Residual ripple 2): | ≤ 5 Vpp |
| Power consumption 3): | < 150 mA |
| Switching frequency 4): | 25 kHz |
| Response time 5): | 20 s |
| Jitter: | < 10 s |
| Switching output: | NPN: HIGH = approx.VS/ LOW ≤ 2 V |
| Switching output: | NPN |
| Input, teach-in (ET) 6): | NPN: Teach: U < 2 V Run: U= 10 V... < UV |
| Input, blanking input (AT) 7): | PNP: blanked: U > 10 V ... < Uv free-running: U < 2 V |
| Retention time (ET): | 25 ms, non-volatile memory |
| Connection type: | Connector M12, 5-pin |
| Protection class 8): | II |
| Circuit protection: | Output Q short-circuit protected, Interference suppression, VS connections reverse-polarity protected |
| Enclosure rating: | IP 67 |
| Weight: | Ca. 400 g |
| Housing material: | Die-cast zinc |
| Output current Imax.: | 100 mA |
| 1) Limit values 2) May not exceed or fall short of VS tolerances 3) Without load 4) With light/dark ratio 1:1 5) Signal transit time with resistive load 6) ET > 2 ms 7) AT > 200 s 8) Reference voltage DC 50 V | |
| Ambient data | |
| Ambient temperature: | Operation: -10 ... 60 C Storage: -10 ... 75 C |
| Shock load: | according to IEC 60068 |
Contact Us
Hot Products