Add To Cart
share
Sick KTL10W-P15 Overview
Contrast Scanner KTL10W-P15 PNP output for fiber optic cable
Sick KTL10W-P15 Description
- Very low jitter (< 10 s)
- Precise light spot
- Best contrast resolution thanks to RGB LED technology
- Two interchangeable light exits
- Five storage banks for settings
- Automatic drift correction
- Fast switching frequency of 25 kHz
- Easy-to-read bar graph display
- Very precise detection of print marks enables optimal results for packaging and printing applications
- All contrast marks, even pale yellow on white paper, can be reliably detected thanks to RGB LED technology
- Automatic drift correction helps detect difficult to see marks, such as faded print marks, enabling higher production reliability
- Reliable operation, even with high-gloss reflective surfaces, increasing throughput
- Simple teach-in via an external signal can be performed while the material is moving, enabling shorter setup time
- Long-lasting, tough metal housing
Your benefits
| Features | |
| Dimensions (L x W x H): | 80 mm x 30.4 mm x 53 mm |
| Sensing distance: | Dependent on the fiber-optic cablethe fiber-optic cable |
| Sensingdistance tolerance: | Dependent on the fiber-optic cablethe fiber-optic cable |
| Light source 1): | LED red, green, blue |
| Light spot size: | (Dependent on the fiber-optic cable) |
| Adjustment: | Dynamic teach-in (min/max) |
| Function: | Deactivation delay ...20 ms |
| 1) Wave length: 470 nm, 525 nm,640 nm | |
| Mechanics/electronics | |
| Supply voltage Vs 1): | DC 12 V ... 30 V |
| Residual ripple 2): | ≤ 5 Vpp |
| Power consumption 3): | < 150 mA |
| Switching frequency 4): | 25 kHz |
| Response time 5): | 20 s |
| Jitter: | < 10 s |
| Switching output: | PNP: HIGH = VS-≤ 2 V / LOWapprox. 0 V |
| Switching output: | PNP |
| Input, teach-in (ET) 6): | PNP: Teach: U= 10 V... < UV Run: U < 2 V |
| Input, blanking input (AT) 7): | PNP: blanked: U > 10 V ... < Uv free-running: U < 2 V |
| Retention time (ET): | 25 ms, non-volatile memory |
| Connection type: | Connector M12, 5-pin |
| Protection class 8): | II |
| Circuit protection: | Output Q short-circuit protected, Interference suppression, VS connections reverse-polarity protected |
| Enclosure rating: | IP 67 |
| Weight: | Ca. 400 g |
| Housing material: | Die-cast zinc |
| Output current Imax.: | 100 mA |
| 1) Limit values 2) May not exceed or fall short of VS tolerances 3) Without load 4) With light/dark ratio 1:1 5) Signal transit time with resistive load 6) ET > 2 ms 7) AT > 200 s 8) Reference voltage DC 50 V | |
| Ambient data | |
| Ambient temperature: | Operation: -10 ... 60 C Storage: -10 ... 75 C |
| Shock load: | according to IEC 60068 |
Contact Us
Hot Products