Add To Cart
share
Sick NT6-P112 Overview
Registration Control Scanner NT6-P112 PNP working distance 9mm
Sick NT6-P112 Description
- LED light source with two switchselectable spectral ranges
- Lens position selectable
- Light- or dark-switching selectable
- Rapid response times
| Features | |
| Dimensions (L x W x H): | 64 mm x 80 mm x 30.4 mm |
| Sensing distance: | 9 mm |
| Sensingdistance tolerance: | 2 mm |
| Light source 1) 2): | LED green |
| Light emission: | Long and short side of housing, exchangeable |
| Light spot size: | (O 2.5 mm) |
| Light spot direction 3): | Round |
| Adjustment: | Manual adjustment, potentiometer |
| Pull-up/Pull-down resistor: | 22k OHM 4) |
| 1) Average service life of 10,000 h at TA = + 25 C 2) Wave length: 560 nm 3) In relationto long side of housing 4) With light/dark ratio 1:1 | |
| Mechanics/electronics | |
| Supply voltage Vs: | DC 10 V ... 30 V |
| Residual ripple: | ≤ 5 Vpp |
| Power consumption 1): | < 80 mA |
| Switching frequency 2): | 5 kHz |
| Response time 3): | > 100 s |
| Switching output: | PNP: HIGH = VS-≤ 2 V / LOWapprox. 0 V |
| Switching output: | PNP |
| Analog output QA: | 0.15 mA ... 6 mA 4) |
| Connection type: | 2 m cable , 4 x 0.34 mm, shielded, PVC, diameter 6 mm, with plug T3104/1 5) |
| Circuit protection: | Output Q short-circuit protected, Interference suppression, VS connections reverse-polarity protected |
| Enclosure rating: | IP 67 |
| Weight: | x approx. 540 g (with cable) |
| Housing material: | Die-cast zinc |
| Output current Imax.: | 200 mA |
| 1) Without load 2) With light/dark ratio 1:1 3) Signal transit time with resistive load 4) RL= 10 k OHM, values from black to high gloss 5) Do not bend below 0 C | |
| Ambient data | |
| Ambient temperature: | Operation: 0 ... 50 C Storage: -25 ... 75 C |
| Shock load: | according to IEC 60068 |
Contact Us
Hot Products