
Add To Cart
share
Sick VL180-2P42436 Overview
VL180-2P42436 Photoelectric reflex switch with polarising filter, scanning range 6m (PL80A), PNP,L.On/D.On output, connector M12, 4-pin, optic axis axial
Sick VL180-2P42436 Description
- Photoelectric retro-reflective sensor with polarizing filter for reliable detection of highly-reflective objects
- Visible red light with homogenous and extremely bright light spot makes for easier alignment
- 2 LEDs with 360 display visibility together with sensitivity control for quick commissioning
- Standardized connection system with cable or M12 device connector
- Compact M18 metal or plastic housing
- Short reaction time enables reliable detection including in dynamic processes and with high-speed objects
- High operating reserves and access to new solutions due to large scanning distance and homogeneous system specifications for all variants
- The answer to economic challenges thanks to simple mounting, standardized connection technology and universal use.
- Convenient, fast, compatible thanks to optimum visibility emitter LED, two status indicator LEDs with 360 visibility, very short housing.
- Compatible and economical due to standardized M18 housing and interfaces
- Visible red light plus sensitivity control enables quick and easy commissioning and adjustment
- 2 indicator LEDs with 360 all-round visibility for easily-recognizable reporting about operating status
Your benefits
Features | |
Sensing range max.: | 0.05 m ... 7 m 1) |
Sensing range: | 0.05 m ... 6 m 2) |
Housing desig (light emission): | Cylindrical, straight, straight |
Light source: | LED 3) |
Type of light: | visible red light |
Wave length: | 645 nm |
Sensitivity adjustment: | Potentiometer, 270 |
Housing length: | 70.2 mm |
Thread diameter (housing): | M18 x 1 |
Sensor/detection principle: | Photoelectric retro-reflective sensor |
Light spot (distance): | 400 mm (6 m) |
Optical axis: | axial |
1) 2) PL80A 3) Average service life 100,000 h at Ta = +25 C | |
Mechanics/electronics | |
Enclosure rating: | IP 67 |
Supply voltage: | 10 V DC ... 30 V DC 1) |
Residual ripple: | 10 % 2) |
Power consumption: | 30 3) |
Switching output: | PNP, light/dark-switching, Selectable via L/D control wire, open collector 4) |
Output current Imax.: | ≤ 100 mA |
Response time: | ≤ 0.5 ms 5) |
Switching frequency: | 1,000 Hz 6) |
Connection type: | Connector M12, 4-pin |
Protection class: | III |
Circuit protection: | A B D 7) 8) 9) |
Weight: | 18 g |
Housing material: | PBT and PC |
Optics material: | PMMA |
Ambient temperature, operation: | -25 C ... 55 C |
Ambient temperature, storage: | -40 C ... 70 C |
Polarisation filter: | ![]() |
Items supplied: | fastening nuts (2 x), Reflector P250 |
Output state-LED: | - |
Signal voltage PNP HIGH / LOW: | approx. VS - 1.8 V / 0 V |
Special device: | - |
Angle of dispersion: | Ca. 4.5 |
1) Limit values 2) May not exceed or fall short of VS 3) Without load 4) Control wire open: dark-switching D.ON 5) Signal transit time with resistive load 6) With light/dark ratio 1:1 7) A = VS connections reverse-polarity protected 8) B = inputs and output reverse-polarity protected 9) D = outputs overcurrent and short-circuit protected |