
Add To Cart
share
Sick VL180-N132 Overview
Reflex Photoelectric Switch VL180-N132 without polarizing filter
Sick VL180-N132 Description
- Photoelectric retro-reflective sensor with infrared light and 3 m scanning distance or visible red light and 1 m scanning distance
- Compact length in M18 metal housing
- Sending and receiving indicator for quick commissioning and adjustment
- Standardized connection with cable or M12 device connector
- 90 deflector head as accessory
- Light/dark switching via control cable
- Economical, low-cost solution for object detection due to combination with a reflector
- Simple and convenient alignment via sender and receiver display
- Trouble-free operation due to insensitivity to ambient light
- Compatible and economical due to standardized M18 housing and connection system
Your benefits
Features | |
Sensing range: | 0.05 m ... 3 m 1) 2) |
Housing desig (light emission): | straight |
Light source: | LED 3) |
Type of light: | Infrared light |
Wave length: | 920 nm |
Adjustment: | adjustable |
Sensitivity adjustment: | Potentiometer, 270 |
Housing length: | 63.3 mm |
Thread diameter (housing): | M18 x 1 |
Sensor/detection principle: | Photoelectric retro-reflective sensor |
Light spot (distance): | 150 mm (3 m) |
Optical axis: | axial |
1) P250 2) The scanning distance is reduced to 2.5 m with right-angle adapter 3) Average service life 100,000 h at Ta = +25 C | |
Mechanics/electronics | |
Enclosure rating: | IP 66 |
Supply voltage: | 10 V DC ... 30 V DC 1) |
Residual ripple: | 5 Vpp 2) |
Power consumption: | 30 3) |
Switching output: | NPN, light/dark-switching, Selectable via L/D control wire, open collector 4) |
Output current Imax.: | ≤ 100 mA |
Response time: | ≤ 1.5 ms 5) |
Switching frequency: | 333 Hz with light/dark ratio 1:1 |
Connection type: | Cable, 4-wire 2 m 6) |
Cable material: | PVC |
Conductor cross-section: | 0.34 mm2 |
Cable diameter: | 5 mm |
Protection class: | III |
Circuit protection: | A C D 7) 8) 9) |
Weight: | 125 g |
Housing material: | Nickel-plated brass, PBT/PC |
Optics material: | PMMA |
Ambient temperature, operation: | -25 C ... 55 C |
Ambient temperature, storage: | -40 C ... 70 C |
Items supplied: | fastening nuts (2 x), Reflector P250 |
Signal voltage NPN HIGH / LOW: | approx. VS / < 1.0 V |
1) Limit values 2) May not exceed or fall short of VS 3) Without load 4) Control wire open: light-switching L.ON 5) Signal transit time with resistive load 6) Do not bend below 0 C 7) A = VS connections reverse-polarity protected 8) C = interference suppression 9) D = outputs overcurrent and short-circuit protected |