f Sick VL180-N162 (6008784)- A&S Automation Co., Ltd
 
Home / Sensors / Sick Sensor / Sick VL180-N162 (6008784)

Add To Cart
share


Sick VL180-N162 Overview



Reflex Photoelectric Switch VL180-N162 with polarizing filter

Sick VL180-N162 Description



  • Photoelectric retro-reflective sensor with infrared light and 3 m scanning distance or visible red light and 1 m scanning distance
  • Compact length in M18 metal housing
  • Sending and receiving indicator for quick commissioning and adjustment
  • Standardized connection with cable or M12 device connector
  • 90 deflector head as accessory
  • Light/dark switching via control cable
  • Your benefits

  • Economical, low-cost solution for object detection due to combination with a reflector
  • Simple and convenient alignment via sender and receiver display
  • Trouble-free operation due to insensitivity to ambient light
  • Compatible and economical due to standardized M18 housing and connection system

Features
Sensing range: 0.05 m ... 1 m
1)
Housing desig (light emission):straight
Light source:LED 2)
Type of light:visible red light
Wave length:680 nm
Adjustment:no/fix
Housing length:63.3 mm
Thread diameter (housing):M18 x 1
Sensor/detection principle:Photoelectric retro-reflective sensor
Light spot (distance):50 mm (1 m)
Optical axis:axial
1) P250 2) Average service life 100,000 h at Ta = +25 C
Mechanics/electronics
Enclosure rating:IP 66
Supply voltage:10 V DC ... 30 V DC 1)
Residual ripple: 5 Vpp 2)
Power consumption:30 3)
Switching output:NPN, light/dark-switching, Selectable via L/D control wire, open collector 4)
Output current Imax.:≤ 100 mA
Response time:≤ 1.5 ms 5)
Switching frequency:333 Hz with light/dark ratio 1:1
Connection type:Cable, 4-wire 2 m 6)
Cable material:PVC
Conductor cross-section:0.34 mm2
Cable diameter:5 mm
Protection class:III
Circuit protection:A
C
D 7) 8) 9)
Weight:125 g
Housing material:Nickel-plated brass, PBT/PC
Optics material:PMMA
Ambient temperature, operation:-25 C ... 55 C
Ambient temperature, storage:-40 C ... 70 C
Polarisation filter:
Items supplied:fastening nuts (2 x), Reflector P250
Signal voltage NPN HIGH / LOW:approx. VS / < 1.0 V
1) Limit values 2) May not exceed or fall short of VS 3) Without load 4) Control wire open: light-switching L.ON 5) Signal transit time with resistive load 6) Do not bend below 0 C 7) A = VS connections reverse-polarity protected 8) C = interference suppression 9) D = outputs overcurrent and short-circuit protected


Hot Products
Reviews(0)
Write a Review

Level:
 
Name:  
Reviews: