Sick VL180-N460 (6008786)- A&S Automation Co., Ltd

Home / Sensors / Sick Sensor / Sick VL180-N460 (6008786)

Add To Cart

Reflex Photoelectric Switch VL180-N460 with polarizing filter

Photoelectric retro-reflective sensor with infrared light and 3 m scanning distance or visible red light and 1 m scanning distance
Compact length in M18 metal housing
Sending and receiving indicator for quick commissioning and adjustment
Standardized connection with cable or M12 device connector
90 deflector head as accessory
Light/dark switching via control cable

Your benefits

Economical, low-cost solution for object detection due to combination with a reflector
Simple and convenient alignment via sender and receiver display
Trouble-free operation due to insensitivity to ambient light
Compatible and economical due to standardized M18 housing and connection system

Features
Sensing range max.:	0.05 m ... 1 m ¹⁾
Sensing range:	0.05 m ... 1 m ²⁾
Housing desig (light emission):	straight
Light source:	LED ³⁾
Type of light:	visible red light
Wave length:	680 nm
Adjustment:	no/fix
Housing length:	69 mm
Thread diameter (housing):	M18 x 1
Sensor/detection principle:	Photoelectric retro-reflective sensor
Light spot (distance):	50 mm (1 m)
Optical axis:	axial
¹⁾ ²⁾ P250 ³⁾ Average service life 100,000 h at Ta = +25 C
Mechanics/electronics
Enclosure rating:	IP 66
Supply voltage:	10 V DC ... 30 V DC ¹⁾
Residual ripple:	5 Vpp ²⁾
Power consumption:	30 ³⁾
Switching output:	NPN, light/dark-switching, Selectable via L/D control wire, open collector ⁴⁾
Output current Imax.:	≤ 100 mA
Response time:	≤ 1.5 ms ⁵⁾
Switching frequency:	333 Hz with light/dark ratio 1:1
Connection type:	Connector M12, 4-pin
Protection class:	III
Circuit protection:	A C D ⁶⁾ ⁷⁾ ⁸⁾
Weight:	65 g
Housing material:	Nickel-plated brass, PBT/PC
Optics material:	PMMA
Ambient temperature, operation:	-25 C ... 55 C
Ambient temperature, storage:	-40 C ... 70 C
Polarisation filter:
Items supplied:	fastening nuts (2 x), Reflector P250
Signal voltage NPN HIGH / LOW:	approx. VS / < 1.0 V
¹⁾ Limit values ²⁾ May not exceed or fall short of V_S ³⁾ Without load ⁴⁾ Control wire open: light-switching L.ON ⁵⁾ Signal transit time with resistive load ⁶⁾ A = VS connections reverse-polarity protected ⁷⁾ C = interference suppression ⁸⁾ D = outputs overcurrent and short-circuit protected

Hot Products

Reviews(0)

Write a Review

Hot Products