Add To Cart
share
Sick VL18-2P4470S02 Overview
Reflex Photoelectric Switch VL18-2P4470S02 metal housing PNP scanning range 2m Plug M12, complementary swichting outputs
Sick VL18-2P4470S02 Description
- Standard photoelectric sensor family in M18 cylindrical housing
- Scanning distance up to 5 m
- Voltage supply of 20 to 253 V AC with TRIAC output.
- Standardized design enables simple assembly and alignment and simple replacement of the device
- Suitable for standard applications
- For connection to alternating voltage
Your benefits
| Features | |
| Sensing range max.: | 0.03 m ... 2.5 m 1) |
| Sensing range: | 0.05 m ... 2 m 2) |
| Housing desig (light emission): | angled 90 |
| Light source: | LED 3) |
| Type of light: | visible red light |
| Wave length: | 660 nm |
| Adjustment: | no/fix |
| Housing length: | 86 mm |
| Thread diameter (housing): | M18 x 1 |
| Sensor/detection principle: | Photoelectric retro-reflective sensor |
| Optical axis: | radial |
| 1) 2) C110A 3) Average service life 100,000 h at Ta = +25 C | |
| Mechanics/electronics | |
| Enclosure rating: | IP 67 |
| Supply voltage: | 10 V DC ... 30 V DC 1) |
| Residual ripple: | ≤ 10 % 2) |
| Power consumption: | ≤ 30 mA 3) |
| Switching output: | PNP, light/dark-switching |
| Output current Imax.: | 100 mA |
| Response time: | ≤ 5 ms 4) |
| Switching frequency: | 100 Hz with light/dark ratio 1:1 |
| Connection type: | Connector M12, 4-pin |
| Protection class: | III |
| Circuit protection: | B D 5) 6) |
| Weight: | 120 g |
| Housing material: | Nickel-plated brass |
| Optics material: | PMMA |
| Ambient temperature, operation: | -25 C ... 60 C |
| Signal voltage PNP HIGH / LOW: | approx. VS - 1.0 V / 0 V |
| Special device: | ![]() |
| 1) Limit values 2) 3) Without load 4) Signal transit time with resistive load 5) B = inputs and output reverse-polarity protected 6) D = outputs overcurrent and short-circuit protected | |
Contact Us
Hot Products