Sick VS180-D132S01 (6035022)- A&S Automation Co., Ltd

Home / Sensors / Sick Sensor / Sick VS180-D132S01 (6035022)

Add To Cart

VS180-D132S01 Photoelectric Sensor through beam sender with extended scanning range and pigtail type Molex

Your benefits

The VS/VE180's combination of sender and receiver enables precise switching and positioning
Simple and convenient alignment due to sender and receiver display
Trouble-free operation due to insensitivity to ambient light
Compatible and economical due to standardized M18 housing and connection system

Features
Sensing range max.:	0 m ... 25 m
Sensing range:	0 m ... 20 m
Housing desig (light emission):	straight
Light source:	LED ¹⁾
Type of light:	Infrared light
Wave length:	870 nm
Housing length:	70 mm
Thread diameter (housing):	M18 x 1
Sensor/detection principle:	Through-beam photoelectric sensor
Light spot (distance):	330 mm (20 m)
Optical axis:	axial
¹⁾ Average service life 100,000 h at Ta = +25 C
Mechanics/electronics
Enclosure rating:	IP 66
Supply voltage:	10 V DC ... 30 V DC ¹⁾
Residual ripple:	5 Vpp ²⁾
Power consumption:	25 ³⁾
Switching frequency:	333 Hz with light/dark ratio 1:1
Connection type:	Cable with plug MOLEX MINI-FIT, 2-pin 0.34 m
Cable material:	PVC
Conductor cross-section:	0.2 mm2
Cable diameter:	3.8 mm
Protection class:	III
Circuit protection:	A C D ⁴⁾ ⁵⁾ ⁶⁾
Weight:	120 g
Housing material:	Nickel-plated brass, PBT/PC
Optics material:	PMMA
Ambient temperature, operation:	-25 C ... 55 C
Ambient temperature, storage:	-40 C ... 70 C
Items supplied:	fastening nuts (2 x)
Special device:
¹⁾ Limit values ²⁾ May not exceed or fall short of V_S ³⁾ Without load ⁴⁾ A = VS connections reverse-polarity protected ⁵⁾ C = interference suppression ⁶⁾ D = outputs overcurrent and short-circuit protected

Hot Products

Reviews(0)

Write a Review

Hot Products