Sick VSE180-2P42439 (6043854)- A&S Automation Co., Ltd

Home / Sensors / Sick Sensor / Sick VSE180-2P42439 (6043854)

Add To Cart

Through-beam photoelectric sensor with large scanning distance.
Visible red light with homogenous and extremely bright light spot makes for easier alignment
2 LEDs with 360 display visibility together with sensitivity control for quick commissioning
Standardized connection system with cable or M12 device connector
Compact M18 metal or plastic housing

Your benefits

Short reaction time enables reliable detection including in dynamic processes and with high-speed objects
High operating reserves and access to new solutions due to large scanning ranges and homogeneous system specifications for all variants
The answer to economic challenges thanks to simple mounting, standardized connection technology and universal use.
Convenient, fast, compatible thanks to optimum visibility emitter LED, two status indicator LEDs with 360 visibility, very short housing.
Compatible and economical due to standardized M18 housing and interfaces
Visible red light plus sensitivity control enables quick and easy commissioning and adjustment
2 indicator LEDs with 360 all-round visibility for easily-recognizable reporting about operating status

Features
Sensing range max.:	0 m ... 25 m
Sensing range:	0 m ... 19 m
Housing desig (light emission):	Cylindrical, angled, angled,90
Light source:	LED ¹⁾
Type of light:	visible red light
Wave length:	645 nm
Sensitivity adjustment:	Potentiometer, 270 ²⁾
Housing length:	83.8 mm
Sensor/detection principle:	Through-beam photoelectric sensor
Light spot (distance):	1,100 mm (20 m)
Optical axis:	radial
¹⁾ Average service life 100,000 h at Ta = +25 C ²⁾ Receiver
Mechanics/electronics
Enclosure rating:	IP 67
Supply voltage:	10 V DC ... 30 V DC ¹⁾
Residual ripple:	10 % ²⁾
Switching output:	PNP, light/dark-switching ³⁾
Output current Imax.:	≤ 100 mA
Response time:	≤ 0.5 ms
Switching frequency:	1,000 Hz ⁴⁾
Connection type:	Connector M12, 4-pin
Protection class:	III
Circuit protection:	A B D ⁵⁾ ⁶⁾ ⁷⁾
Weight:	18 g
Housing material:	PBT/PC
Optics material:	PMMA
Ambient temperature, operation:	-25 C ... 55 C
Ambient temperature, storage:	-40 C ... 70 C
Polarisation filter:	-
Output state-LED:
Signal voltage PNP HIGH / LOW:	approx. VS - 1.8 V / 0 V
Power consumption, sender:	≤ 20 mA
Power consumption, receiver:	≤ 15 mA
Angle of dispersion:	Ca. 5
¹⁾ Limit values ²⁾ May not exceed or fall short of V_S ³⁾ Control wire open: dark-switching D.ON ⁴⁾ With light/dark ratio 1:1 ⁵⁾ A = V_S connections reverse-polarity protected ⁶⁾ B = inputs and output reverse-polarity protected ⁷⁾ D = outputs overcurrent and short-circuit protected

Hot Products

Reviews(0)

Write a Review

Hot Products