
Add To Cart
share
Sick VTF180-2N41119 Description
- Photoelectric proximity sensor with background suppression due to focused optics or as an energetic variant with a large scanning distance
- Visible red light with homogenous and extremely bright light spot makes for easier alignment
- High switching frequencies of 1000Hz
- Standardized connection system with cable or M12 device connector
- Compact M18 metal or plastic housing
- Short reaction time enables reliable detection including in dynamic processes and with high-speed objects
- High operating reserves and access to new solutions due to three different scanning distances and homogeneous system specifications for all variants
- The answer to economic challenges thanks to simple mounting, standardized connection technology and universal use.
- Convenient, fast, compatible thanks to optimum visibility emitter LED, two status indicator LEDs with 360 all-round visibility, extra short housing
- Compatible and economical due to standardized M18 housing and interfaces
- Visible red light plus sensitivity control enables quick and easy commissioning and adjustment
- 2 indicator LEDs with 360 all-round visibility for easily-recognizable reporting about operating status
Your benefits
Features | |
Sensing range max.: | 1 mm ... 130 mm 1) |
Sensing range: | 1 mm ... 100 mm 2) |
Housing desig (light emission): | Cylindrical, angled, angled,90 |
Light source: | LED 3) |
Type of light: | visible red light |
Wave length: | 645 nm |
Sensitivity adjustment: | Potentiometer, 270 |
Housing length: | 76.5 mm |
Sensor/detection principle: | Photoelectric proximity sensor, Background blanking |
Light spot (distance): | O 8 mm (110 mm) |
Optical axis: | radial |
1) 2) Object with 90 % reflectance (referred to standard white DIN 5033) 3) Average service life 100,000 h at Ta = +25 C | |
Mechanics/electronics | |
Enclosure rating: | IP 67 |
Supply voltage: | 10 V DC ... 30 V DC 1) |
Residual ripple: | 10 % 2) |
Power consumption: | ≤ 30 mA |
Switching output: | NPN, light/dark-switching 3) |
Output current Imax.: | ≤ 100 mA |
Response time: | ≤ 0.5 ms |
Switching frequency: | 1,000 Hz 4) |
Connection type: | Cable, 4-wire, 2 m 5) |
Cable material: | PVC |
Conductor cross-section: | 0.18 mm2 |
Cable diameter: | 3.8 mm |
Protection class: | III |
Circuit protection: | A B D 6) 7) 8) |
Weight: | 62 g |
Housing material: | PBT/PC |
Optics material: | PMMA |
Ambient temperature, operation: | -25 C ... 55 C |
Ambient temperature, storage: | -40 C ... 70 C |
Signal voltage NPN HIGH / LOW: | approx. VS / < 1.8 V |
Output state-LED: | ![]() |
Special Design: | focused optics |
1) Limit values 2) May not exceed or fall short of VS 3) Control wire open: light-switching L.ON 4) With light/dark ratio 1:1 5) Do not bend below 0 C 6) A = VS connections reverse-polarity protected 7) B = inputs and output reverse-polarity protected 8) D = outputs overcurrent and short-circuit protected |