
Add To Cart
share
Sick WL100L-F1131S02 Description
- Standardized miniature housing with integrated M3 threaded mounting holes
- Laser emitter LED, class 1
- Standard optics
- Detection of the smallest of objects
- High optical operating reserve
- Simple, standardized mounting
Your benefits
Features | |
Dimensions (W x H x D):: | 11 mm x 31 mm x 20 mm |
Sensing range max.: | 0.08 m ... 12 m 1) |
Sensing range: | 0.08 m ... 10 m 2) |
Housing desig (light emission): | Cuboid, Slim |
Light source: | Laser 3) |
Type of light: | visible red light |
Wave length: | 650 nm |
Sensitivity adjustment: | Potentiometer, 270 |
Laser class: | 1 |
Sensor/detection principle: | Photoelectric retro-reflective sensor, Standard optics |
Light spot (distance): | 12 mm (10 m) |
1) 2) P250F 3) Average service life 50,000 h at Ta = +25 C | |
Mechanics/electronics | |
Enclosure rating: | IP 65 |
Supply voltage: | 10 V DC ... 30 V DC 1) |
Residual ripple: | 10 % 2) |
Power consumption: | ≤ 30 mA 3) |
Switching output: | PNP, light/dark-switching, manually selectable, open collector |
Output current Imax.: | ≤ 100 mA |
Response time: | < 0.25 ms 4) |
Switching frequency: | 2,000 Hz 5) |
Connection type: | Cable with plug, M12, 4-pin, 2 m 6) |
Cable material: | PVC |
Conductor cross-section: | 0.18 mm2 |
Circuit protection: | A B D 7) 8) 9) |
Weight: | 50 g |
Housing material: | ABS/PC/POM |
Optics material: | PMMA |
Ambient temperature, operation: | -10 C ... 50 C |
Ambient temperature, storage: | -40 C ... 70 C |
Polarisation filter: | ![]() |
Items supplied: | Stainless steel mounting bracket (1.4301/304) BEF-W100-A, Reflector P250F |
Focus adjustable: | - |
Voltage supply-LED: | - |
Output state-LED: | - |
Signal voltage PNP HIGH / LOW: | UV - 1,8 V / ca. 0 V |
Special device: | - |
1) Limit values, operation in short-circuit protected network max. 8 A 2) May not exceed or fall short of VS 3) Without load 4) Signal transit time with resistive load 5) With light/dark ratio 1:1 6) Do not bend below 0 C 7) A = VS connections reverse-polarity protected 8) B = inputs and output reverse-polarity protected 9) D = outputs overcurrent and short-circuit protected |