f Sick WL100-P1332S05 REF (6028146)- A&S Automation Co., Ltd
 
Home / Sensors / Sick Sensor / Sick WL100-P1332S05 REF (6028146)

Add To Cart
share


Sick WL100-P1332S05 REF Overview



Photoelectric Reflex Switch WL100-P1332S05 with polarization filter, LED-red, pigtail 200 mm, plug M8 3 pin

Sick WL100-P1332S05 REF Description



  • Standardized miniature housing with integrated M3 threaded mounting holes
  • Optics with standardized red LED or bright light LED
  • Standard optics
  • Version specially for transparent objects
  • Your benefits

  • Highly visible light spot (bright light models)
  • High optical operating reserve
  • Detection of reflective plastic surfaces at close range (bright light models)
  • Simple, standardized mounting
  • Version for detection of transparent objects

Features
Dimensions (W x H x D):: 11 mm x 31 mm x 20 mm
Sensing range max.: 0.01 m ... 6 m 1)
Sensing range: 0.01 m ... 5 m 2)
Housing desig (light emission): Slim
Light source: LED 3)
Type of light: visible red light
Wave length: 680 nm
Adjustment: no/fix
Sensitivity adjustment: No/fix
Sensor/detection principle: Photoelectric retro-reflective sensor, Standard optics
Light spot (distance): 250 mm (3.5 m)
1) 2) PL80A 3) Average service life 100,000 h at Ta = +25 C
Mechanics/electronics
Enclosure rating: IP 65
Supply voltage: 10 V DC ... 30 V DC 1)
Residual ripple: 10 % 2)
Power consumption: ≤ 30 mA 3)
Switching output: PNP, light switching, open collector
Output current Imax.: ≤ 100 mA
Response time: ≤ 0.5 ms 4)
Switching frequency: 1,000 Hz with light/dark ratio 1:1
Connection type: Cable with plug, M8, 3-pin 200 mm 5)
Cable material: PVC
Number of cores: 3
Circuit protection: A
B
D 6) 7) 8)
Weight: 53 g
Housing material: ABS/PC
Optics material: PMMA
Ambient temperature, operation: -25 C ... 55 C
Ambient temperature, storage: -40 C ... 70 C
Polarisation filter:
Signal voltage PNP HIGH / LOW: UV - 1,8 V / ca. 0 V
Angle of dispersion: 4
1) Limit values, operation in short-circuit protected network max. 8 A 2) 3) Without load 4) Signal transit time with resistive load 5) Do not bend below 0 C 6) A = VS connections reverse-polarity protected 7) B = inputs and output reverse-polarity protected 8) D = outputs overcurrent and short-circuit protected


Hot Products
Reviews(0)
Write a Review

Level:
 
Name:  
Reviews: