f Sick WL100-P1422 (6027658)- A&S Automation Co., Ltd
 
Home / Sensors / Sick Sensor / Sick WL100-P1422 (6027658)

Add To Cart
share


Sick WL100-P1422 Overview



Photoelectric Reflex Switch WL100-P1422 PNP, for transparent objects, LED-red, cable 2 m

Sick WL100-P1422 Description



  • Standardized miniature housing with integrated M3 threaded mounting holes
  • Optics with standardized red LED or bright light LED
  • Standard optics
  • Version specially for transparent objects
  • Your benefits

  • Highly visible light spot (bright light models)
  • High optical operating reserve
  • Detection of reflective plastic surfaces at close range (bright light models)
  • Simple, standardized mounting
  • Version for detection of transparent objects

Features
Dimensions (W x H x D)::11 mm x 31 mm x 20 mm
Sensing range max.: 0.01 m ... 3 m 1)
Sensing range: 0.01 m ... 2.6 m 2)
Housing desig (light emission):Slim
Light source:LED 3)
Type of light:visible red light
Wave length:680 nm
Adjustment:adjustable
Sensitivity adjustment:Adjustable Potentiometer, 270
Sensor/detection principle:Photoelectric retro-reflective sensor, Standard optics
Light spot (distance):200 mm (2 m)
1) 2) PL80A 3) Average service life 100,000 h at Ta = +25 C
Mechanics/electronics
Enclosure rating:IP 65
Supply voltage:10 V DC ... 30 V DC 1)
Residual ripple: 10 % 2)
Power consumption:≤ 30 mA 3)
Switching output:PNP, light/dark-switching, manually selectable, open collector
Output current Imax.:≤ 100 mA
Response time:≤ 0.5 ms 4)
Switching frequency:1,000 Hz with light/dark ratio 1:1
Connection type:Cable, 3-wire 2 m 5)
Cable material:PVC
Number of cores:3
Conductor cross-section:0.18 mm2
Circuit protection:A
B
D 6) 7) 8)
Weight:53 g
Housing material:ABS/PC/POM
Optics material:PMMA
Ambient temperature, operation:-25 C ... 55 C
Ambient temperature, storage:-40 C ... 70 C
Polarisation filter:
Signal voltage PNP HIGH / LOW:UV - 1,8 V / ca. 0 V
Attenuation along light beam:> 20 %
Special Design:for transparent objects
Angle of dispersion:4
1) Limit values, operation in short-circuit protected network max. 8 A 2) 3) Without load 4) Signal transit time with resistive load 5) Do not bend below 0 C 6) A = VS connections reverse-polarity protected 7) B = inputs and output reverse-polarity protected 8) D = outputs overcurrent and short-circuit protected


Hot Products
Reviews(0)
Write a Review

Level:
 
Name:  
Reviews: