
Add To Cart
share
Sick WL100-P4230 REF Overview
Photoelectric Reflex Switch WL100-P4230 PNP, with Polfilter, LED-red, plug M8, 4-pin
Sick WL100-P4230 REF Description
- Standardized miniature housing with integrated M3 threaded mounting holes
- Optics with standardized red LED or bright light LED
- Standard optics
- Version specially for transparent objects
- Highly visible light spot (bright light models)
- High optical operating reserve
- Detection of reflective plastic surfaces at close range (bright light models)
- Simple, standardized mounting
- Version for detection of transparent objects
Your benefits
Features | |
Dimensions (W x H x D):: | 11 mm x 31 mm x 20 mm |
Sensing range max.: | 0.01 m ... 6 m 1) |
Sensing range: | 0.01 m ... 5 m 2) |
Housing desig (light emission): | Slim |
Light source: | LED 3) |
Type of light: | visible red light |
Wave length: | 680 nm |
Adjustment: | no/fix |
Sensitivity adjustment: | No/fix |
Sensor/detection principle: | Photoelectric retro-reflective sensor, Standard optics |
Light spot (distance): | 250 mm (3.5 m) |
1) 2) PL80A 3) Average service life 100,000 h at Ta = +25 C | |
Mechanics/electronics | |
Enclosure rating: | IP 65 |
Supply voltage: | 10 V DC ... 30 V DC 1) |
Residual ripple: | 10 % 2) |
Power consumption: | ≤ 30 mA 3) |
Switching output: | PNP, Dark-switching, open collector |
Output current Imax.: | ≤ 100 mA |
Response time: | ≤ 0.5 ms 4) |
Switching frequency: | 1,000 Hz with light/dark ratio 1:1 |
Connection type: | Connector M8, 4-pin |
Number of cores: | 4 |
Circuit protection: | A B D 5) 6) 7) |
Weight: | 9 g |
Housing material: | ABS/PC |
Optics material: | PMMA |
Ambient temperature, operation: | -25 C ... 55 C |
Ambient temperature, storage: | -40 C ... 70 C |
Polarisation filter: | ![]() |
Signal voltage PNP HIGH / LOW: | UV - 1,8 V / ca. 0 V |
Angle of dispersion: | 4 |
1) Limit values, operation in short-circuit protected network max. 8 A 2) 3) Without load 4) Signal transit time with resistive load 5) A = VS connections reverse-polarity protected 6) B = inputs and output reverse-polarity protected 7) D = outputs overcurrent and short-circuit protected |