f Sick WL100-P4400S38 (6042013)- A&S Automation Co., Ltd
 
Home / Sensors / Sick Sensor / Sick WL100-P4400S38 (6042013)

Add To Cart
share






Sick WL100-P4400S38 Description



  • Standardized miniature housing with integrated M3 threaded mounting holes
  • Optics with standardized red LED or bright light LED
  • Standard optics
  • Version specially for transparent objects
  • Your benefits

  • Highly visible light spot (bright light models)
  • High optical operating reserve
  • Detection of reflective plastic surfaces at close range (bright light models)
  • Simple, standardized mounting
  • Version for detection of transparent objects

Features
Dimensions (W x H x D)::11 mm x 31 mm x 20 mm
Sensing range max.: 0.1 m ... 7.5 m 1)
Sensing range: 0.1 m ... 6 m 2)
Housing desig (light emission):Slim
Light source:BrightLight-LED 3)
Type of light:visible red light
Wave length:645 nm
Adjustment:adjustable
Sensitivity adjustment:Adjustable Potentiometer, 270
Sensor/detection principle:Photoelectric retro-reflective sensor, Standard optics
Light spot (distance):150 mm (4 m)
1) 2) PL80A 3) Average service life 100,000 h at Ta = +25 C
Mechanics/electronics
Enclosure rating:IP 67
Supply voltage:10 V DC ... 30 V DC 1)
Residual ripple: 10 % 2)
Power consumption:≤ 30 mA 3)
Switching output:PNP, light/dark-switching, manually selectable, open collector
Output current Imax.:≤ 100 mA
Response time:≤ 0.5 ms 4)
Switching frequency:1,000 Hz with light/dark ratio 1:1
Connection type:Connector M8, 4-pin
Number of cores:4
Circuit protection:A
B
D 5) 6) 7)
Weight:9 g
Housing material:ABS/PC/POM
Optics material:PMMA
Ambient temperature, operation:-25 C ... 55 C
Ambient temperature, storage:-40 C ... 70 C
Polarisation filter:
Signal voltage NPN HIGH / LOW:approx. VS / < 1.8 V
Special device:
Angle of dispersion:2
Special features:without adjustment potis, without accessories
1) Limit values, operation in short-circuit protected network max. 8 A 2) 3) Without load 4) Signal transit time with resistive load 5) A = VS connections reverse-polarity protected 6) B = inputs and output reverse-polarity protected 7) D = outputs overcurrent and short-circuit protected


Hot Products
Reviews(0)
Write a Review

Level:
 
Name:  
Reviews: