f Sick WL12L-2P130 (1022041)- A&S Automation Co., Ltd
 
Home / Sensors / Sick Sensor / Sick WL12L-2P130 (1022041)

Add To Cart
share


Sick WL12L-2P130 Overview



Reflex Photoelectric Switch WL12L-2P130 cable 2 m, 5 pin

Sick WL12L-2P130 Description



  • Laser protection class 1 or 2
  • Autocollimation optics
  • Robust sensors for industrial use
  • Easily visible laser light spot for versatile detection of objects
  • High performance in metal housing, optionally available with Teflon coating
  • Versatile mounting options due to dovetail mounting - mounting holes and oblong holes
  • All-round easily visible status LEDs
  • Adjustable scanning range and focus
  • Your benefits

    Reliable, universal detection of objects

    Effective suppression of optical interference factors from the industrial environment

    Easily visible laser light spot for quick commissioning

    User-friendly sensors, simple commissioning and installation plus simple sensor diagnosis due to easily visible status LEDs mean there is no need for specialist personnel or expensive training.

    Less downtime and robust metal housing resistant to high-pressure cleaner, cleaning agents and disinfectant, optionally available with Teflon coating

    Laser protection class 1 or 2 for peace of mind in all usage cases

    Easily installed with SICK accessories


Features
Dimensions (W x H x D)::15 mm x 49 mm x 41.5 mm
Sensing range max.: 0 m ... 18 m
Light source:Laser 1)
Type of light:visible red light
Wave length:650 nm
Adjustment:adjustable
Sensitivity adjustment:Potentiometer
Sensor/detection principle:Photoelectric retro-reflective sensor, autocollimation
Light spot (distance):0.8 mm (300 mm)
1) Average service life 50,000 h at Ta = +25 C
Mechanics/electronics
Enclosure rating:IP 67
IP 69K
Supply voltage:10 V DC ... 30 V DC 1)
Residual ripple:≤ 5 Vpp 2)
Power consumption:≤ 55 mA 3)
Switching output:PNP, light switching, Selectable via L/D control wire
NPN, Dark-switching, 0 V or not connected, light-switching
, Uv, dark-switching
Output current Imax.:100 mA
Response time:≤ 200 s 4)
Switching frequency:2,500 Hz with light/dark ratio 1:1
Electrical connection:Cable, 4-wire 2 m
Protection class:II
Circuit protection:A
C
D 5) 6) 7)
Ambient temperature, operation:-10 C ... 50 C
Ambient temperature, storage:-25 C ... 75 C
Polarisation filter:
Signal voltage NPN HIGH / LOW:Uv - < 2,9 V, Uv V / 0 V <= 1,5 V
Signal voltage PNP HIGH / LOW:Uv - < 2,9 V, Uv V / 0 V <= 1,5 V
1) Limit values 2) May not exceed or fall short of VS 3) Without load 4) Signal transit time with resistive load 5) A = VS connections reverse-polarity protected 6) C = interference suppression 7) D = outputs overcurrent and short-circuit protected


Hot Products
Reviews(0)
Write a Review

Level:
 
Name:  
Reviews: