
Add To Cart
share
Sick WL14-2K930S11 Overview
Photoelectric Reflex Switch WL14-2K930S11 PNP, complementary outputs, pigtail with M12-plug, immune against stretchfoil, range 5 m, pin assignment Q+Q/ changed
Sick WL14-2K930S11 Description
- Emitter LED with visible red light
- Polarizing filter
- Insensitivity to ambient light
- Rugged plastic housing
- Fast installation due to visible red light
- Reliable object detection even for reflective objects thanks to a polarizing filter
- No interference from ambient light or devices mounted opposite one another
- Reliable availability in the field
Your benefits
Features | |
Dimensions (W x H x D):: | 17.6 mm x 75.5 mm x 33.5 mm |
Sensing range max.: | 0.5 m ... 5 m 1) |
Housing desig (light emission): | Slim |
Light source: | LED 2) |
Type of light: | visible red light |
Wave length: | 645 nm |
Adjustment: | no/fix |
Sensitivity adjustment: | No/fix |
Sensor/detection principle: | Photoelectric retro-reflective sensor, Standard optics |
Light spot (distance): | 140 mm (4 m) |
1) PL80A 2) Average service life 100,000 h at Ta = +25 C | |
Mechanics/electronics | |
Enclosure rating: | IP 67 |
Supply voltage: | 10 V DC ... 30 V DC 1) |
Residual ripple: | 5 Vpp 2) |
Power consumption: | ≤ 35 mA 3) |
Switching output: | PNP, light/dark-switching, Complementary |
Output current Imax.: | ≤ 100 mA |
Response time: | ≤ 2.5 ms 4) |
Switching frequency: | 200 Hz with light/dark ratio 1:1 |
Connection type: | Cable with plug, M12, 4-pin 0.29 m 5) |
Cable material: | PVC |
Number of cores: | 4 |
Circuit protection: | A C D 6) 7) 8) |
Weight: | 90 g |
Housing material: | ABS |
Optics material: | PMMA |
Ambient temperature, operation: | -25 C ... 60 C |
Ambient temperature, storage: | -40 C ... 70 C |
Polarisation filter: | ![]() |
Voltage supply-LED: | ![]() |
Output state-LED: | ![]() |
Special device: | ![]() |
Angle of dispersion: | 2 |
Special features: | High functional reliability on foil-wrapped objects |
1) Limit values, operation in short-circuit protected network max. 8 A 2) May not exceed or fall short of VS tolerances 3) Without load 4) Signal transit time with resistive load 5) Do not bend below 0 C 6) A = VS connections reverse-polarity protected 7) C = interference suppression 8) D = outputs overcurrent and short-circuit protected |