Sick WL14-2P430S02 (1028719)- A&S Automation Co., Ltd

Home / Sensors / Sick Sensor / Sick WL14-2P430S02 (1028719)

Add To Cart

REF.PHOTOELEC.SWITCH

Your benefits

Fast installation due to visible red light
Reliable object detection even for reflective objects thanks to a polarizing filter
No interference from ambient light or devices mounted opposite one another
Reliable availability in the field

Features
Dimensions (W x H x D)::	17.6 mm x 75.5 mm x 33.5 mm
Sensing range max.:	0 m ... 7 m ¹⁾
Sensing range:	0 m ... 5 m ²⁾
Housing desig (light emission):	Slim
Light source:	LED ³⁾
Type of light:	visible red light
Wave length:	645 nm
Adjustment:	adjustable
Sensitivity adjustment:	Adjustable potentiometer, 1-turn
Sensor/detection principle:	Photoelectric retro-reflective sensor, autocollimation
Light spot (distance):	40 mm (2 m)
¹⁾ ²⁾ PL80A ³⁾ Average service life 100,000 h at Ta = +25 C
Mechanics/electronics
Enclosure rating:	IP 67
Supply voltage:	10 V DC ... 30 V DC ¹⁾
Residual ripple:	5 Vpp ²⁾
Power consumption:	≤ 40 mA ³⁾
Switching output:	PNP, light/dark-switching, Complementary
Output current Imax.:	≤ 100 mA
Response time:	≤ 0.5 ms ⁴⁾
Switching frequency:	1,000 Hz with light/dark ratio 1:1
Connection type:	Connector M12, 4-pin
Number of cores:	4
Circuit protection:	A C D ⁵⁾ ⁶⁾ ⁷⁾
Weight:	40 g
Housing material:	ABS
Optics material:	PMMA
Ambient temperature, operation:	-40 C ... 60 C
Ambient temperature, storage:	-40 C ... 75 C
Polarisation filter:
Voltage supply-LED:
Output state-LED:
Special device:
Angle of dispersion:	1.8
¹⁾ Limit values, operation in short-circuit protected network max. 8 A ²⁾ May not exceed or fall short of V_S tolerances ³⁾ Without load ⁴⁾ Signal transit time with resistive load ⁵⁾ A = VS connections reverse-polarity protected ⁶⁾ C = interference suppression ⁷⁾ D = outputs overcurrent and short-circuit protected

Hot Products

Reviews(0)

Write a Review

Hot Products