f Sick WL15-A1130 (1046279)- A&S Automation Co., Ltd
 
Home / Sensors / Sick Sensor / Sick WL15-A1130 (1046279)

Add To Cart
share


Sick WL15-A1130 Overview



WL15-A1130 REF.PHOTOELEC.SWITCH

Sick WL15-A1130 Description



  • Photoelectric retro-reflective sensor in hybrid design with 5 m sensing range
  • Mounting flexibility: M18 front mount using plastic nut or snap ring, side assembly with 24.1 mm through holes
  • Flush mounting possible using the snap ring
  • Transparent back cover
  • Highly visible sender LED
  • Options with an adjustable delay of 0 - 2s
  • Your benefits

  • Compatible with many competitor models, making it easy to install and commission
  • Flush mounting reduces setup time and prevents obstructions to material flow on conveyor sections
  • Clearly visible LED indicators reduce setup time and simplify troubleshooting
  • Quick and easy alignment due to highly visible light spot

Features
Dimensions (W x H x D)::16.2 mm x 48.5 mm x 31.9 mm
Sensing range max.: 0.035 m ... 5 m
Sensing range: 0.035 m ... 3.5 m
Housing desig (light emission):Hybrid
Light source:LED 1)
Type of light:visible red light
Wave length:650 nm
Thread diameter (housing):M18 x 1
Sensor/detection principle:Photoelectric retro-reflective sensor
Light spot (distance):140 mm (3.5 m)
1) Average service life 100,000 h at Ta = +25 C
Mechanics/electronics
Enclosure rating:IP 67
Supply voltage:10 V DC ... 30 V DC 1)
Residual ripple:≤ 5 Vpp 2)
Power consumption:≤ 30 mA 3)
Switching output:PNP, Dark-switching
NPN, Dark-switching
Output current Imax.:≤ 100 mA
Response time:≤ 1.25 ms 4)
Switching frequency:400 Hz 5)
Connection type:Cable, 4-wire, 2 m 6)
Cable material:PUR
Conductor cross-section:0.14 mm2
Protection class:II 7)
Circuit protection:A
B
D 8) 9) 10)
Weight:20 g
Housing material:ABS
Optics material:PMMA
Ambient temperature, operation:-25 C ... 55 C
Ambient temperature, storage:-25 C ... 70 C
Polarisation filter:
Items supplied:snap-ring and M18 nut
Special device:-
Angle of dispersion:1.5
1) Limit values, operation in short-circuit protected network max. 8 A 2) May not exceed or fall short of VS 3) Without load 4) Signal transit time with resistive load 5) With light/dark ratio 1:1 6) Do not bend below 0 C 7) Reference voltage 50 V DC 8) A = VS connections reverse-polarity protected 9) B = inputs and output reverse-polarity protected 10) D = outputs overcurrent and short-circuit protected


Hot Products
Reviews(0)
Write a Review

Level:
 
Name:  
Reviews: