
Add To Cart
share
Sick WL18-3P030S08 Description
- Sender LED with visible red light
- Autocollimation optics
- Sensitivity control
- Insensitivity to ambient light
- Rugged plastic housing
- Fast installation due to highly visible red light
- Reliable object detection without blind zones thanks to autocollimation optics
- Comfortable and fast sensing distance setting
- No interference from ambient light or devices mounted opposite one another
- Reliable availability in the field
Your benefits
Features | |
Dimensions (W x H x D):: | 17.6 mm x 75.5 mm x 33.5 mm |
Sensing range max.: | 0 m ... 2 m 1) |
Housing desig (light emission): | Slim |
Light source: | LED 2) |
Type of light: | visible red light |
Wave length: | 645 nm |
Adjustment: | adjustable |
Sensitivity adjustment: | Adjustable potentiometer, 1-turn |
Sensor/detection principle: | Photoelectric retro-reflective sensor, autocollimation |
Light spot (distance): | 40 mm (2 m) |
1) PL80A 2) Average service life 100,000 h at Ta = +25 C | |
Mechanics/electronics | |
Enclosure rating: | IP 67 |
Supply voltage: | 10 V DC ... 30 V DC 1) |
Residual ripple: | < 5 Vpp 2) |
Power consumption: | 40 mA 3) |
Switching output: | PNP, light/dark-switching |
Output current Imax.: | 100 mA |
Response time: | < 500 s 4) |
Switching frequency: | 1,000 Hz with light/dark ratio 1:1 |
Connection type: | Cable with plug, M12, 4-pin 100 mm 5) |
Cable material: | PUR |
Circuit protection: | A C D 6) 7) 8) |
Weight: | 100 g |
Housing material: | ABS |
Optics material: | PMMA |
Ambient temperature, operation: | -40 C ... 60 C |
Ambient temperature, storage: | -40 C ... 75 C |
Polarisation filter: | ![]() |
Voltage supply-LED: | ![]() |
Output state-LED: | ![]() |
Special device: | ![]() |
Special Design: | for transparent objects |
Angle of dispersion: | 1.8 |
Special features: | Q and Q/ are reversed |
1) Limit values, operation in short-circuit protected network max. 8 A 2) 3) Without load 4) Signal transit time with resistive load 5) Do not bend below 0 C 6) A = VS connections reverse-polarity protected 7) C = interference suppression 8) D = outputs overcurrent and short-circuit protected |